LNP Lubricomp® EFL-4036 Polyetherimide, Glass Fiber Reinforcement, PTFE Lubricant (discontinued **)

Category	Polymer , Thermoplastic , Polyetherimide (PEI)
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LNP Lubricomp® EFL-4036 Polyetherimide, Glass Fiber Reinforcement, PTFE Lubricant (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Features: LubricatedForms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names instituted after the SABIC purchase.

Physical Properties	Metric	English	Comments
Specific Gravity	1.62 g/cc	1.62 g/cc	Method A; ASTM D792
Density	1.62 g/cc	0.0585 lb/in³	ISO 1183
Water Absorption	0.10 %	0.10 %	at 24 hrs; ASTM D570
Linear Mold Shrinkage	0.0020 cm/cm	0.0020 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0050 cm/cm	0.0050 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	175 MPa	25400 psi	ASTM D638
Elongation at Break	2.0 %	2.0 %	ASTM D638
Tensile Modulus	12.7 GPa	1840 ksi	ASTM D638
Flexural Strength	248 MPa	36000 psi	ASTM D790
Flexural Modulus	11.3 GPa	1640 ksi	ASTM D790
Izod Impact, Notched	1.23 J/cm @Thickness 3.18 mm	2.30 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Unnotched	7.10 J/cm @Thickness 3.18 mm	13.3 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Notched (ISO)	13.1 kJ/m²	6.23 ft-lb/in²	ISO 180
Izod Impact, Unnotched (ISO)	46.9 kJ/m²	22.3 ft-lb/in²	ISO 180
Falling Dart Impact	10.3 J	7.60 ft-lb	ASTM D3763
Impact Test	3.65 J	2.69 ft-lb	Multi-Axial Instrumented Impact Energy; ISO 6603-2
Coefficient of Friction, Dynamic	0.46	0.46	vs. Steel - @ 40 psi, 50 ft/min, tested in accordance with LNP WI-0687; ASTM D1894
Coefficient of Friction, Static	0.43	0.43	vs. Steel @ 40 psi, tested in accordance with LNP WI-0687; ASTM D1894
K (wear) Factor	70.5 x 10^-8 mm³/N-M	35.0 x 10^-10 in³-min/ft-lb-hr	40psi, 50ft/min; tested in accordance with LNP WI-0687

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	199 °C	390 °F	Unannealed; ASTM D648

Processing Properties	Metric	English	Comments
Melt Temperature	360 - 366 °C	680 - 691 °F
Mold Temperature	121 - 149 °C	250 - 300 °F
Drying Temperature	121 - 149 °C	250 - 300 °F
Dry Time	4 hour	4 hour
Moisture Content	0.020 %	0.020 %	Suggested
Back Pressure	0.345 - 0.689 MPa	50.0 - 99.9 psi

Users viewing this material also viewed the following: