- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Kraton® G1657 M (SEBS) Linear Triblock Copolymer
Kraton® G1657 M (SEBS) Linear Triblock Copolymer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® G1657 M (SEBS) Linear Triblock Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Kraton G1657 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13% . It is supplied from North America in the physical form identified: Kraton G1657 MS - supplied as a dusted pelletKraton G1657 MO - supplied as a dusted pelletRegion: Asia Pacific, Europe, Japan, North America, and South AmericaUses: Kraton G1657 M is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.Applications: Adhesives, Sealant and Coatings; Compounding and Personal Hygiene; Impact Modification; Medical; Packaging and Polymod; and Personal CareInformation provided by Kraton®
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.900 g/cc | 0.900 g/cc | ASTM D4025 |
| Volatiles | <= 1.0 % | <= 1.0 % | KM 04 |
| Viscosity | 1200 - 1800 cP | 1200 - 1800 cP | 20% Toluene Solution at 25°C; BAM 922 |
| Melt Flow | 22 g/10 min @Load 5.00 kg, Temperature 230 °C |
22 g/10 min @Load 11.0 lb, Temperature 446 °F |
|
| Ash | 0.020 - 0.12 % | 0.020 - 0.12 % | S, For G1657 MS, silica dusted; BAM 908 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 47 @Time 10.0 sec |
47 @Time 0.00278 hour |
Typical values on polymer compression molded at 300°F; ASTM D2240 |
| Tensile Strength | 23.4 MPa | 3390 psi | Typical properties of film cast from toluene solution; ASTM D412 |
| Elongation at Break | 750 % | 750 % | Typical properties of film cast from toluene solution.; ASTM D412 |
| 300% Modulus | 0.00241 GPa | 0.350 ksi | Typical properties of film cast from toluene solution; ASTM D412 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Diblock Content | 30 % | 30 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Content | Dust, O | 0.45-0.75%, BAM 1029 |
| Non-staining phenolic antioxidant | 0.03-0.1%, KM 08 | |
| Polystyrene | 12.3-14.3%, Measured on the polymer before hydrogenation, KM 03 | |
| Total Extractables | <1.5%, KM 05 | |
| Styrene/Rubber Ratio | 13/87 |
Users viewing this material also viewed the following:
- PlastiComp Complet® LCF40 - PA66 Nylon 66, 40% Long Carbon Fiber Reinforced
- Polimeri Europa Dutral® TER 6148 Ethylene - Propylene - Diene Terpolymer
- PolyOne Geon® XV3811B Thermoplastic Elastomer - PVC/TPU (discontinued **)
- MarkeTech W90Cu Tungsten/Copper Heat Sink Material
- Solvay TECHNYL® C 536XT PA6, Conditioned
- Saint-Gobain CHR® K104 Polyimide Film Backing Silicone Adhesive Pressure Sensitive Tape
- Arlon 25188T017 Silicone Rubber/Laminated ETFE Film
- Buckeye Polymers BP RPP 1010 T Polypropylene, 10% Mineral Filled
- DuPont™ Sclairfilm® LX-3 LLDPE Film, Laminating, 38.1 µm Thickness (discontinued **)
Copyright © lookpolymers.com All Rights Reserved