- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Kraton® D4433 P (SIS) Linear Block Copolymer
Kraton® D4433 P (SIS) Linear Block Copolymer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® D4433 P (SIS) Linear Block Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Kraton D4433 P is an oiled, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified: Kraton D4433 PT - supplied as a dusted dense pelletRegion: Asia Pacific, Europe, Japan, North America, and South America Uses: Kraton D4433 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.Applications: Adhesives, Sealant and Coatings; and Compounding and Personal Hygiene
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.920 g/cc | 0.920 g/cc | ASTM D4025 |
| Volatiles | <= 0.70 % | <= 0.70 % | KM 04 |
| Brookfield Viscosity | 380 cP @Temperature 25.0 °C |
380 cP @Temperature 77.0 °F |
25% Toluene solution; BAM 922 |
| Melt Flow | 25 g/10 min @Load 5.00 kg, Temperature 200 °C |
25 g/10 min @Load 11.0 lb, Temperature 392 °F |
|
| Ash | 0.30 - 0.40 % | 0.30 - 0.40 % | BAM 908 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 29 | 29 | 10 seconds. Typical values on polymer compression molded at 150°C (300°F).; ASTM 2240 |
| Tensile Strength, Ultimate | 6.205 MPa | 900.0 psi | Typical properties based on film cast from toluene solution.; ASTM D412 |
| Elongation at Break | 1450 % | 1450 % | Typical properties based on film cast from toluene solution.; ASTM D412 |
| 300% Modulus | 0.00103 GPa | 0.149 ksi | Typical properties based on film cast from toluene solution.; ASTM D412 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Diblock Content | 20 % | 20 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Content | Antioxidant | 0.06-0.2%, KM 08 |
| Oil | 21.5-24.5%, KM 05 | |
| Polystyrene | 20-24%, KM 03 | |
| Styrene / Rubber ratio | 22/78 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Cycoloy® RCY6215 PC+ABS
- 3M Dyneon™ TF 2024 PTFE Paste Extrusion Powder (discontinued **)
- Kinlead LSD11 Low Temperature Grade Heat Sealable Film (thickness: 30 µm)
- Lehmann & Voss LUVOCOM® 1105-0918/BL PEEK, with glass fiber
- Shinil Chemical SHINSTAT PMMA Electrostatic Control Polymer Injection Grade
- Cotronics Resbond™ 905 High Temperature Ceramic Adhesive, Low Expansion
- DSM Akulon® K224-HG7 (Cond.) 35% Glass Reinforced Nylon 6 (North America)
- Arlon 32140R060 0.060" Uncured Silicone Rubber on Release PET
Copyright © lookpolymers.com All Rights Reserved