- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Kraton® D1161 K (SIS) Linear Triblock Copolymer
Kraton® D1161 K (SIS) Linear Triblock Copolymer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® D1161 K (SIS) Linear Triblock Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Kraton D1161 K is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified: Kraton D1161 KT - supplied as a dusted porous pelletKraton D1161 KU - supplied as an undusted porous pelletRegion: Asia Pacific, Europe, Japan, North America, and South AmericaUses: Kraton D1161 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.Applications: Adhesives, Sealant and Coatings; Compounding and Personal Hygiene; Impact Modification; Footwear; and Bitumen ModificationInformation provided by Kraton®
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.920 g/cc | 0.920 g/cc | ASTM D4025 |
| Volatiles | <= 0.70 % | <= 0.70 % | KM 04 |
| Viscosity | 1200 cP | 1200 cP | 25% Toluene Solution at 25°C; BAM 922 |
| Melt Flow | 12 g/10 min @Load 5.00 kg, Temperature 200 °C |
12 g/10 min @Load 11.0 lb, Temperature 392 °F |
|
| Ash | 0.25 - 0.45 % | 0.25 - 0.45 % | Talc dust specification is only applicable to the dusted version which is D1161 KT; BAM 908 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 32 @Time 10.0 sec |
32 @Time 0.00278 hour |
Typical values on polymer compression molded at 300°F; ASTM D2240 |
| Tensile Strength | 21.37 MPa | 3099 psi | Typical properties of film cast form toluene solution; ASTM D412 |
| Elongation at Break | 1300 % | 1300 % | Typical properties of film cast from toluene solution; ASTM D412 |
| 300% Modulus | 0.000689 GPa | 0.0999 ksi | Typical properties of film cast from toluene solution; ASTM D412 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Diblock Content | 19 % | 19 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Content | Antioxidant | 0.08-0.3%, KM 08 |
| Polystyrene | 14-17%, KM 03 | |
| Total Extractables | <1.0%, KM 05 | |
| Styrene/Rubber Ratio | 15/85 |
Users viewing this material also viewed the following:
- Polymax® Maxelast® D6880 TPE, Extruded
- Inno-Comp INNOPOL® CS 2-9302 Elastomer Modified Polypropylene Block-Copolymer
- KaMin KaMin® 100C Kaolin Clay - Calcined
- H.C. Starck Amperit® 553.065 Tungsten Carbide-Cobalt-Chromium 86-10-4 (WC-Co-Cr)
- Schott NG12 Neutral Density Filter
- Saint-Gobain CHR® M897 Polyester Film Backing Natural Rubber Adhesive Pressure Sensitive Tape
- Shin-Etsu Silicones KMP-598 Fluid
- A. Schulman FORMION™ FI 396 Ionomer
- Ineos J50-1000-178 HDPE
- Chesterton 652 Pneumatic Lubricant & Conditioner
Copyright © lookpolymers.com All Rights Reserved