- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Kraton® D1133 K (SBS) Linear Block Copolymer
Kraton® D1133 K (SBS) Linear Block Copolymer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® D1133 K (SBS) Linear Block Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Kraton D1133 K is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 36%. It is supplied from North America in the physical form identified: Kraton D1133 KT - supplied as a dusted porous pelletKraton D1133 KIM - supplied as a dusted powderRegion: Asia Pacific, Europe, Japan, North America, and South America Uses: Kraton D1133 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.Applications: Adhesives, Sealant and Coatings; Bitumen Modification; Compounding and Personal Hygiene; Footwear; Impact Modification; Medical; Packaging and Polymod; Personal Care; and Roads and Roofing
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.940 g/cc | 0.940 g/cc | ASTM D4025 |
| Volatiles | <= 1.0 % | <= 1.0 % | KM 04 |
| Brookfield Viscosity | 3500 - 4900 cP @Temperature 25.0 °C |
3500 - 4900 cP @Temperature 77.0 °F |
25% Toluene solution; BAM 922 |
| Melt Flow | <= 1.0 g/10 min @Load 5.00 kg, Temperature 200 °C |
<= 1.0 g/10 min @Load 11.0 lb, Temperature 392 °F |
|
| Ash | 0.15 - 0.35 % | 0.15 - 0.35 % | BAM 908 |
| 4.0 - 6.0 % | 4.0 - 6.0 % | BAM 908 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 74 | 74 | 10 seconds. Typical values on polymer compression molded at 150°C (300°F).; ASTM D2240 |
| Tensile Strength | 20.7 MPa | 3000 psi | ASTM D412 |
| Elongation at Break | 800 % | 800 % | ASTM D412 |
| 300% Modulus | 0.00207 GPa | 0.300 ksi | ASTM D412 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Diblock Content | 34 % | 34 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Content | Antioxidant | 0.15-0.40%, KM 08 |
| Polystyrene | 34-36%, KM 03 | |
| Total Extractables | <1.6%, KM 05 | |
| Styrene/Rubber Ratio | 36/64 |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Rigid Molding M5705 Polyvinyl Chloride, Rigid (PVC, Rigid)
- Nye Lubricants 500S (RT) Synthetic Oil
- Parker Chomerics CHO-SEAL® 2557 Non-Conductive Extruded Elastomer Specifications
- SABIC Innovative Plastics LNP KONDUIT PX08321 PA 6 (Asia Pacific)
- Overview of materials for Phenolic, Graphite Cloth Composite
- BASF Capron® B73QP Nylon 6 (DAM) (discontinued **)
- Lubrizol Advanced Materials Pearlthane® ECO D12T80 Thermoplastic Polyurethane
- SABIC Innovative Plastics ULTEM 2410 PEI
- PlastxWorld CEVIAN® S1210 PC/ABS alloy
- Dow Corning 5324 Fluid
Copyright © lookpolymers.com All Rights Reserved