- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- TFE/Perfluoromethylvinylether Copolymer (MFA)
- Isoflon MFA TFE/Perfluoromethylvinylether Copolymer
Isoflon MFA TFE/Perfluoromethylvinylether Copolymer
| Category | Polymer , Thermoplastic , Fluoropolymer , TFE/Perfluoromethylvinylether Copolymer (MFA) |
| Manufacturer | Isoflon |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Isoflon MFA TFE/Perfluoromethylvinylether Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Fluoropolymer material specifications.Information provided by Isoflon.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.12 - 2.17 g/cc | 2.12 - 2.17 g/cc | ISO 12086 |
| Water Absorption | 0.025 % | 0.025 % | DIN 53 495 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 57 - 60 | 57 - 60 | DIN 53 505 |
| Tensile Strength | 28.0 - 36.0 MPa | 4060 - 5220 psi | DIN 53455 |
| Elongation at Break | 250 - 360 % | 250 - 360 % | DIN 53455 |
| Tensile Modulus | 0.440 - 0.480 GPa | 63.8 - 69.6 ksi | DIN 53457 |
| Coefficient of Friction, Dynamic | 0.28 | 0.28 | on steel |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 120 µm/m-°C @Temperature 20.0 - 100 °C |
66.7 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Thermal Conductivity | 0.200 W/m-K | 1.39 BTU-in/hr-ft²-°F | DIN 52612 |
| Maximum Service Temperature, Air | 230 °C | 446 °F | Continuous |
| Minimum Service Temperature, Air | -150 °C | -238 °F | Continuous |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 30.0 - 35.0 kV/mm | 762 - 889 kV/in | DIN 53481 |
Users viewing this material also viewed the following:
- Plasma Coatings 200-2 Surface Material
- Precision Polymer Engineering S50T Silicone Rubber
- I. Stern N2380 High Heat Crystal Polystyrene
- Greene Tweed Orthetek® RP Polyketone, Random Carbon Fiber
- SABIC Innovative Plastics Ultem 1010KM PEI (Europe-Africa-Middle East)
- Corning 7056 Alkali Borosilicate Crushed/Powdered Glass
- 3M Scotchcal™ ElectroCut™ 7125-66 Graphic Film
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, Hardness 65A
- LATI Latilub 66-20T G/40 PA66, 40% Glass Fiber Reinforced, PTFE Filled
Copyright © lookpolymers.com All Rights Reserved