Ineos J60-800-178 HDPE

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded
Manufacturer	Ineos Olefins & Polymers USA
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ineos J60-800-178 HDPE.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

A high density polyethylene homopolymer. It has a narrow molecular weight distribution and is intended for the injection molding of screw caps dedicated to the packaging of still and sparkling water. Parts fabricated from this material exhibit a glossy surface finish, and have good impact strength and rigidity. This material meets the Food and Drug Administration requirements of 21CFR 177.1520.

Physical Properties	Metric	English	Comments
Density	0.961 g/cc	0.0347 lb/inÂ³	ASTM D4883
Environmental Stress Crack Resistance	3.0 hour	3.0 hour	Cond. B, 10%; ASTM D 1693
Melt Flow	8.5 g/10 min @Load 2.16 kg, Temperature 190 Â°C	8.5 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	65	65	ASTM D2240
Tensile Strength, Yield	31.0 MPa	4500 psi	2 in/min.; ASTM D638
Elongation at Break	600 %	600 %	2 in/min.; ASTM D638
Flexural Modulus	1.552 GPa	225.1 ksi	Tangent-Method 1; ASTM D790
Izod Impact, Notched	0.530 J/cm	0.993 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	87.0 Â°C	189 Â°F	ASTM D648
Vicat Softening Point	128 Â°C	262 Â°F	ASTM D1525
Brittleness Temperature	<= -75.0 Â°C	<= -103 Â°F	ASTM D 746

Descriptive Properties	Value	Comments
Process	Injection

Users viewing this material also viewed the following: