Ineos ABS Centrex® 601 ASA+AES Blend (discontinued **)

Category	Polymer , Thermoplastic , AES Polymer , ASA Polymer , Acrylonitrile/Styrene/Acrylate (ASA), Unreinforced, Molded
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ineos ABS Centrex® 601 ASA+AES Blend (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Key Features:UnfilledHigh impact or high impact modifiedLight stabilized or stable to lightU.V. stabilized or stable to weatherSuitable processing methods:Profile extrusionSheet extrusionInformation provided by Bayer Polymers.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholding under a JV with Lanxess in 2007. Subsequently Ineos acquired 100% of Ineos ABS.

Physical Properties	Metric	English	Comments
Density	1.00 g/cc	0.0361 lb/in³
Melt Flow	3.5 g/10 min @Load 10.0 kg, Temperature 220 °C	3.5 g/10 min @Load 22.0 lb, Temperature 428 °F	cm³/10 min.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	28.2 MPa	4090 psi
Elongation at Break	50 %	50 %	Nominal
Elongation at Yield	3.0 %	3.0 %
Tensile Modulus	1.72 GPa	249 ksi
Charpy Impact, Notched	5.77 J/cm²	27.5 ft-lb/in²

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	72.0 µm/m-°C @Temperature 20.0 °C	40.0 µin/in-°F @Temperature 68.0 °F
Deflection Temperature at 1.8 MPa (264 psi)	79.0 °C	174 °F
Vicat Softening Point	93.0 °C	199 °F	50°C/h 50N

Processing Properties	Metric	English	Comments
Melt Temperature	250 °C	482 °F	Injection Molding
Mold Temperature	60.0 °C	140 °F	Injection Molding
Injection Velocity	200 mm/sec	7.87 in/sec
Injection Pressure	60.0 MPa	8700 psi

Users viewing this material also viewed the following: