- HOME
- POLYMER SEARCH
- Ferrous Metal
- Stainless Steel
- T 600 Series Stainless Steel
- Industeel URANUS® B6 Multipurpose Austenitic Stainless Steel with PREN = 34
Industeel URANUS® B6 Multipurpose Austenitic Stainless Steel with PREN = 34
| Category | Metal , Ferrous Metal , Austenitic , Stainless Steel , T 600 Series Stainless Steel |
| Manufacturer | Groupe Arcelor |
| Trade Name | URANUS® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Industeel URANUS® B6 Multipurpose Austenitic Stainless Steel with PREN = 34.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: URANUS® B6 (904L) is a multipurpose 20 Cr - 4.3 Mo high corrosion resistance austenitic stainless steel developed 40 years ago by CLI. The UR B6N is alloyed with nitrogen (~ 0.13%) to increase its structure stability and corrosion resistance. Due to combined additions of chromium (20%), molybdenum (4.3%), copper (1.5%) combined with its high nickel content, the grade is recommended for most applications dealing with medium to severe corrosive solutions. UR B6 has improved stress corrosion resistance properties. UR B6 alloy is particularly used in sulphuric and phosphoric acids applications. The localized corrosion resistance of UR B6N grade is much higher than that of alloy 825. UR B6N is particularly well adapted to clad plates applications (separators).Information provided by manufacturer.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.05 g/cc | 0.291 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Vickers | 160 - 210 | 160 - 210 | Typical, V<sub>10</sub> |
| Tensile Strength, Ultimate | >= 550 MPa | >= 79800 psi | Minimum Guaranteed |
| Tensile Strength, Yield | >= 245 MPa @Strain 0.200 % |
>= 35500 psi @Strain 0.200 % |
|
| >= 275 MPa @Strain 1.00 % |
>= 39900 psi @Strain 1.00 % |
||
| Elongation at Break | >= 40 % | >= 40 % | |
| Modulus of Elasticity | 200 GPa | 29000 ksi | |
| Poissons Ratio | 0.333 | 0.333 | Calculated |
| Shear Modulus | 75.0 GPa @Temperature 20.0 °C |
10900 ksi @Temperature 68.0 °F |
|
| Charpy Impact | >= 100 J @Temperature -196 °C |
>= 73.8 ft-lb @Temperature -321 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 15.0 µm/m-°C @Temperature 20.0 - 100 °C |
8.33 µin/in-°F @Temperature 68.0 - 212 °F |
|
| 16.0 µm/m-°C @Temperature 20.0 - 300 °C |
8.89 µin/in-°F @Temperature 68.0 - 572 °F |
||
| 17.0 µm/m-°C @Temperature 20.0 - 500 °C |
9.44 µin/in-°F @Temperature 68.0 - 932 °F |
||
| Specific Heat Capacity | 0.500 J/g-°C @Temperature 20.0 °C |
0.120 BTU/lb-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 17.0 W/m-K @Temperature 20.0 °C |
118 BTU-in/hr-ft²-°F @Temperature 68.0 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | 0.020 % | 0.020 % | |
| Chromium, Cr | 20 % | 20 % | |
| Copper, Cu | 1.5 % | 1.5 % | |
| Iron, Fe | 49.18 % | 49.18 % | As remainder |
| Molybdenum, Mo | 4.3 % | 4.3 % | |
| Nickel, Ni | 25 % | 25 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000800 ohm-cm @Temperature 20.0 °C |
0.0000800 ohm-cm @Temperature 68.0 °F |
Users viewing this material also viewed the following:
- Pyrotek IR-3 Fiber Seal Pre-cut Gasket
- SABIC Innovative Plastics Lexan® FXD104R PC
- LyondellBasell Alathon® M6010SB High Density Polyethylene, MMW Film Grade
- Freudenberg Simrit S40 Silicone Elastomer (VMQ)
- Special Metals INCONEL® 706 Precipitation Hardening Alloy, Hot Finished Flat, 2 Part Heat Treatment, 1.250 inch (31.8 mm) Thickness
- Styrolution Styrolux 3G33 SBC
- A. Schulman POLYBATCH™ Light Blue 40442 Concentrate Based In LLDPE
- Adamas Adalon® 703 PTFE, 15% Carbon Fiber
Copyright © lookpolymers.com All Rights Reserved