- HOME
- POLYMER SEARCH
- Austenitic
- Industeel URANUS® B26 6 Mo High Performance Super-Austenitic Stainless Steel with PREN = 43
Industeel URANUS® B26 6 Mo High Performance Super-Austenitic Stainless Steel with PREN = 43
| Category | Metal , Ferrous Metal , Austenitic , Stainless Steel |
| Manufacturer | Groupe Arcelor |
| Trade Name | URANUS® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Industeel URANUS® B26 6 Mo High Performance Super-Austenitic Stainless Steel with PREN = 43.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: URANUS® B26 (UR B26) is a 25% Ni, 20% Cr, 6% Mo superaustenitic stainless steel grade with 0.2 % nitrogen additions, particularly designed for high structural stability and high corrosion resistance properties. The 25% nickel and 1% copper additions combined with the chromium and molybdenum additions improve the behavior of the steel in many corrosive solutions encountered for example in chemical and petrochemical processes. The alloy behaves particularly well in sulphuric acid solutions and is well adapted for pollution control equipments (scrubbers...) The alloy is also seawater resistant and has extensively been used in offshore industries. The fully austenitic microstructure produced by the 25% nickel addition explains its high toughness at temperatures as low as -200°C (-328°F).Information provided by manufacturer.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.10 g/cc | 0.293 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Vickers | 180 - 220 | 180 - 220 | Typical, V<sub>10</sub> |
| Tensile Strength, Ultimate | >= 650 MPa | >= 94300 psi | Minimum Guaranteed |
| Tensile Strength, Yield | >= 320 MPa @Strain 0.200 % |
>= 46400 psi @Strain 0.200 % |
|
| >= 350 MPa @Strain 1.00 % |
>= 50800 psi @Strain 1.00 % |
||
| Elongation at Break | >= 40 % | >= 40 % | |
| Modulus of Elasticity | 195 GPa | 28300 ksi | |
| Poissons Ratio | 0.30 | 0.30 | Calculated |
| Shear Modulus | 75.0 GPa @Temperature 20.0 °C |
10900 ksi @Temperature 68.0 °F |
|
| Charpy Impact | >= 100 J @Temperature -196 °C |
>= 73.8 ft-lb @Temperature -321 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 15.8 µm/m-°C @Temperature 20.0 - 100 °C |
8.78 µin/in-°F @Temperature 68.0 - 212 °F |
|
| 16.5 µm/m-°C @Temperature 20.0 - 300 °C |
9.17 µin/in-°F @Temperature 68.0 - 572 °F |
||
| 17.3 µm/m-°C @Temperature 20.0 - 500 °C |
9.61 µin/in-°F @Temperature 68.0 - 932 °F |
||
| Specific Heat Capacity | 0.450 J/g-°C @Temperature 20.0 °C |
0.108 BTU/lb-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 13.0 W/m-K @Temperature 20.0 °C |
90.2 BTU-in/hr-ft²-°F @Temperature 68.0 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | 0.010 % | 0.010 % | |
| Chromium, Cr | 20.5 % | 20.5 % | |
| Copper, Cu | 1.0 % | 1.0 % | |
| Iron, Fe | 46.989 % | 46.989 % | As remainder |
| Molybdenum, Mo | 6.3 % | 6.3 % | |
| Nickel, Ni | 25 % | 25 % | |
| Nitrogen, N | 0.20 % | 0.20 % | |
| Sulfur, S | 0.0010 % | 0.0010 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000950 ohm-cm @Temperature 20.0 °C |
0.0000950 ohm-cm @Temperature 68.0 °F |
Users viewing this material also viewed the following:
- Network Polymers NPP 25-5001
- Ravago Manufacturing Americas Hysun™ A6020 ASA+PC
- Samyang Trihip® B500 High Impact Polystyrene
- A. Schulman POLYBATCH™ Blue Tint P40530 Concentrate Based In Homopolymer Polypropylene
- CPT C-Flex® R70-003 Opaque Biocompatible TPE
- Chi Mei Polylac® PA-765A ABS - Flame Retardant
Copyright © lookpolymers.com All Rights Reserved