- HOME
- POLYMER SEARCH
- T S30000 Series Stainless Steel
- Industeel CLC 18.15.4L 3% Mo Minimum Austenitic Stainless Steel
Industeel CLC 18.15.4L 3% Mo Minimum Austenitic Stainless Steel
| Category | Metal , Ferrous Metal , Austenitic , Stainless Steel , T S30000 Series Stainless Steel |
| Manufacturer | Groupe Arcelor |
| Trade Name | CLC |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Industeel CLC 18.15.4L 3% Mo Minimum Austenitic Stainless Steel.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: CLC 18-15-4L (317L) is an austenitic stainless steel with a 3% minimum Molybdenum addition. Alloys CLC 18-15-4L (317L) exhibit austenitic microstructure free of deleterious carbide precipitations in grain boundaries. The grade contains some residual ferrite (=2%) after solution annealing (1100 - 1150°C/ 2012 - 2102°F) and water quenching. Its low carbon content avoids the intergranular corrosion, even on welded pieces without an ulterior water quenching. The high Molybdenum content gives this steel a higher resistance to corrosion in sulfuric media than standard grades (CLC17-12-2L / 316L). Its main properties are : high ductility, easy weldability and improved corrosion resistance. The main application are chemical tankers, chemical industries and pulp and paper industry.Information provided by manufacturer.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.00 g/cc | 0.289 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | >= 515 MPa | >= 74700 psi | |
| Tensile Strength, Yield | >= 210 MPa @Strain 0.200 % |
>= 30500 psi @Strain 0.200 % |
|
| >= 250 MPa @Strain 1.00 % |
>= 36300 psi @Strain 1.00 % |
||
| Elongation at Break | >= 40 % | >= 40 % | |
| Modulus of Elasticity | 200 GPa @Temperature 20.0 - 100 °C |
29000 ksi @Temperature 68.0 - 212 °F |
|
| Poissons Ratio | 0.299 | 0.299 | Calculated |
| Shear Modulus | 77.0 GPa @Temperature 20.0 - 100 °C |
11200 ksi @Temperature 68.0 - 212 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 16.0 µm/m-°C @Temperature 20.0 - 100 °C |
8.89 µin/in-°F @Temperature 68.0 - 212 °F |
|
| 16.5 µm/m-°C @Temperature 20.0 - 200 °C |
9.17 µin/in-°F @Temperature 68.0 - 392 °F |
||
| 17.0 µm/m-°C @Temperature 20.0 - 300 °C |
9.44 µin/in-°F @Temperature 68.0 - 572 °F |
||
| 18.0 µm/m-°C @Temperature 20.0 - 500 °C |
10.0 µin/in-°F @Temperature 68.0 - 932 °F |
||
| Specific Heat Capacity | 0.500 J/g-°C @Temperature 20.0 - 100 °C |
0.120 BTU/lb-°F @Temperature 68.0 - 212 °F |
|
| Thermal Conductivity | 14.0 W/m-K @Temperature 20.0 - 100 °C |
97.2 BTU-in/hr-ft²-°F @Temperature 68.0 - 212 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | <= 0.030 % | <= 0.030 % | |
| Chromium, Cr | 18.5 % | 18.5 % | |
| Iron, Fe | 64.77 - 64.8 % | 64.77 - 64.8 % | As remainder |
| Molybdenum, Mo | 3.2 % | 3.2 % | |
| Nickel, Ni | 13.5 % | 13.5 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000750 ohm-cm @Temperature 20.0 - 100 °C |
0.0000750 ohm-cm @Temperature 68.0 - 212 °F |
Users viewing this material also viewed the following:
- Ravago Manufacturing Americas Hylon® N1033HL Nylon 6/6 (Cond)
- DuPont Performance Polymers Crastin® SK615SF NC010 PBT (Unverified Data**)
- Overview of materials for Polycarbonate/PET Polyester Blend, Glass Reinforced
- Saint-Gobain CHR® M66 Polyester Film Backing Silicone Adhesive Pressure Sensitive Tape
- Teknor Apex Monprene® MP-2740L3-UV Thermoplastic Elastomer
- Chosun Refractories CUN-804 Nozzle Brick
- Atom Adhesives AA-BOND F253 Epoxy Adhesive
- Bulk Molding Compounds BMC 851 Corrosion Resistant, Flame Retardant Molding Compound
- Arlon T2030-R004-12 0.030" Cured Self-Fusing Silicone Rubber Tape
Copyright © lookpolymers.com All Rights Reserved