- HOME
- POLYMER SEARCH
- Thermoset
- Methacrylate
- Methacrylate Adhesive
- ITW Devcon Plastic Welderâ„¢ Methacrylate Adhesive SD, Off-White
ITW Devcon Plastic Welderâ„¢ Methacrylate Adhesive SD, Off-White
| Category | Polymer , Adhesive , Thermoset , Methacrylate , Methacrylate Adhesive |
| Manufacturer | ITW Devcon |
| Trade Name | Plastic Welder™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ITW Devcon Plastic Welderâ„¢ Methacrylate Adhesive SD, Off-White.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by ITW Devcon
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Elongation at Break | 10 % | 10 % | |
| Adhesive Bond Strength | 15.1 MPa | 2190 psi | lap shear (on grit blasted steel, bond line thickness of 0.010"); ASTM D1002 |
| Tensile Impact Strength | 42.0 kJ/m² | 20.0 ft-lb/in² | |
| Peel Strength | 1.75 - 2.10 kN/m | 10.0 - 12.0 pli |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 121 °C | 250 °F | dry |
| Minimum Service Temperature, Air | -55.0 °C | -67.0 °F | dry |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 4.00 - 6.00 min | 0.0667 - 0.100 hour | Working time |
| 15.0 - 20.0 min | 0.250 - 0.333 hour | Fixture time | |
| 120 - 240 min | 2.00 - 4.00 hour | Functional cure |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Mix ratio (Resin:Hardener) | 1:1 |
Users viewing this material also viewed the following:
- Quadrant EPP Ketron® CM 1030HT PEEK Polyetheretherketone, 30% carbon fiber reinforced, compression molded (ASTM Product Data Sheet)
- TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 20 PHR Polyfil HG90 Filler
- Kingfa PA6-T25 25% Mineral Filled PA6
- Solvay TECHNYL® PSB 286 PA6, Conditioned
- Solvay Specialty Polymers Tecnoflon® PL 557 Fluoroelastomer
- A. Schulman POLYBATCH™ Red LL50304/3 Concentrate Based In LLDPE
- Dow Corning SILASTIC® Q7-4535 BIOMEDICAL GRADE ETR ELASTOMER
- Covestro Bayblend® FR 3006 Polycarbonate + ABS, Flame Retardant Grade
- Fainplast Compounds MRT 256/G Medical Rigid PVC, Injection Molding
- Ineos Nova 202 Crystal Polystyrene High Heat Extrusion Grade (discontinued **)
Copyright © lookpolymers.com All Rights Reserved