- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Hyosung Topilene J301CP PP
Hyosung Topilene J301CP PP
| Category | Polymer , Thermoplastic , Polypropylene (PP) |
| Manufacturer | Hyosung Co. |
| Trade Name | Topilene |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Hyosung Topilene J301CP PP.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
J301CP Injection Special Purpose GradeApplications: Cap of pressure bottleCharacteristics:High stiffnessSlip propertyInformation provided by Hyosung Corporation
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow | 1.7 g/10 min | 1.7 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 95 | 95 | ASTM D785 |
| Tensile Strength, Yield | 40.2 MPa | 5830 psi | ASTM D638 |
| Elongation at Break | 200 % | 200 % | ASTM D638 |
| Flexural Modulus | 1.96 GPa | 284 ksi | ASTM D790 |
| Izod Impact, Unnotched | 0.441 J/cm | 0.827 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 125 °C | 257 °F | ASTM D648 |
| Vicat Softening Point | 150 °C | 302 °F | ASTM D1525 |
Users viewing this material also viewed the following:
- ND Industries 420 Instant High Pressure Pipe Sealant
- Nilit FRIANYL A63 GV40 Nylon 6.6 for injection molding, 40% glass fiber reinforced
- Polykemi AB POLYfill PPH GF8030 HC Polypropylene Homopolymer, Glass Fibre-Reinforced
- PolyOne Synprene® RT-3770 Styrene Butadiene Block Copolymer (SBC) with Mineral Filler (discontinued **)
- Techmer ES HiFill® PP CO GF30 CC 30% Glass Filled
- Zeon Chemicals Zetpol® 20 Hydrogenated Nitrile Elastomomer
- A. Schulman ComAlloy® E-12421 Reinforced High Flow Polyamide
- E-Polymers EFLEX® S1030 General
- Loctite® 416 General Purpose Ethyl Cyanoacrylate Bonding Adhesive
Copyright © lookpolymers.com All Rights Reserved