- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone, RTV, Adhesive/Sealant Grade
- Humiseal 1C51 Silicone Conformal Coating
Humiseal 1C51 Silicone Conformal Coating
| Category | Polymer , Adhesive , Thermoset , Silicone , Silicone, RTV, Adhesive/Sealant Grade |
| Manufacturer | Humiseal |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Humiseal 1C51 Silicone Conformal Coating.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Humiseal 1C51 Silicone Conformal CoatingHigh temperature resistanceGood dielectrical propertiesGood moisture resistanceRepairableUL ApprovedMIL-I-46058C ApprovedPasses thermal shock test (MIL-I-46058C)Flammability (self extinguishing) (ASTM D635)Good resistance to solvents (IPC CC 830)Recommended Stripper: 1090 Cure Type: Heat
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.947 g/cc | 0.0342 lb/in³ | ASTM D1475 |
| Solids Content | 100 % | 100 % | Fed Std 141 Method 4044 |
| Volatile Organic Compounds (VOC) Content | 0.00 g/l | 0.00 g/l | |
| Viscosity | 575 cP | 575 cP | Fed Std Method 4287 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Modulus of Elasticity | 0.00353 GPa | 0.512 ksi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 150 µm/m-°C @Temperature 20.0 °C |
83.3 µin/in-°F @Temperature 68.0 °F |
|
| Maximum Service Temperature, Air | 200 °C | 392 °F | |
| Minimum Service Temperature, Air | -65.0 °C | -85.0 °F | |
| Glass Transition Temp, Tg | >= 200 °C | >= 392 °F | |
| Flash Point | 121 °C | 250 °F | ASTM D56 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistance | 8.00e+10 ohm | 8.00e+10 ohm | Moisture Resistance; MIL-I-46058C |
| Insulation Resistance | 5.00e+14 ohm | 5.00e+14 ohm | Insulation Resistance; MIL-I-46058C |
| Dielectric Constant | 2.4 | 2.4 | ASTM D1 50 65T |
| Dielectric Breakdown | >= 1500 V | >= 1500 V | Dielectric Withstand; MIL-I-46058C |
| Dissipation Factor | 0.010 | 0.010 | ASTM D1 50 65T |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 10.0 min @Temperature 105 °C |
0.167 hour @Temperature 221 °F |
Optimum properties |
| Shelf Life | 6.00 Month @Temperature 23.0 °C |
6.00 Month @Temperature 73.4 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Coverage | 750 ft²/gal |
Users viewing this material also viewed the following:
- Plastcom PLASTAMID® 66 GF 20 PA66 reinforced with glass fiber
- Huntsman PE7018 Profile Extrusion Polyethylene (discontinued **)
- Lehmann & Voss LUVOCOM® 1105-7238 PEEK, with glass fiber
- Techmer ES HiFill® PA6/6 GF/M40 B1 BK 40% Glass/Mineral Fiber Filled
- ExxonMobil Enmist EP 460
- BASF Neopolen® 1710 40 mm Expanded Polyethylene
- Solvay Specialty Polymers Hyflon® PFA P450 Perfluoroalkoxy (PFA) (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved