- HOME
- POLYMER SEARCH
- Thermoset
- Polyurethane, TS
- Thermoset Polyurethane, Adhesive
- Humiseal 1A33 Urethane Conformal Coating
Humiseal 1A33 Urethane Conformal Coating
| Category | Polymer , Adhesive , Thermoset , Polyurethane, TS , Thermoset Polyurethane, Adhesive |
| Manufacturer | Humiseal |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Humiseal 1A33 Urethane Conformal Coating.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Humiseal 1A33 Urethane Conformal CoatingHigh moisture resistanceExcellent dielectrical propertiesExcellent chemical resistanceRepairableUL ApprovedMIL-I-46058C ApprovedPasses thermal shock test (MIL-I-46058C)Flammability (self extinguishing) (ASTM D635)Excellent resistance to solvents (IPC CC 830)Recommended Stripper: 1063Recommended Thinner: 521 Cure Type: Heat
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.911 g/cc | 0.0329 lb/in³ | ASTM D1475 |
| Solids Content | 44 % | 44 % | Fed Std 141 Method 4044 |
| Volatile Organic Compounds (VOC) Content | 508 g/l | 508 g/l | |
| Viscosity | 220 cP | 220 cP | Fed Std Method 4287 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Modulus of Elasticity | 0.02699 GPa | 3.915 ksi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 170 µm/m-°C @Temperature 20.0 °C |
94.4 µin/in-°F @Temperature 68.0 °F |
|
| Maximum Service Temperature, Air | 125 °C | 257 °F | |
| Minimum Service Temperature, Air | -65.0 °C | -85.0 °F | |
| Glass Transition Temp, Tg | 56.0 °C | 133 °F | |
| Flash Point | -1.11 °C | 30.0 °F | ASTM D56 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistance | 1.60e+10 ohm | 1.60e+10 ohm | Moisture Resistance; MIL-I-46058C |
| Insulation Resistance | 2.00e+14 ohm | 2.00e+14 ohm | Insulation Resistance; MIL-I-46058C |
| Dielectric Constant | 3.6 | 3.6 | ASTM D1 50 65T |
| Dielectric Breakdown | >= 1500 V | >= 1500 V | Dielectric Withstand; MIL-I-46058C |
| Dissipation Factor | 0.020 | 0.020 | ASTM D1 50 65T |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 15.0 min | 0.250 hour | Dry Time to Handling; Fed Std 141 4061 |
| 10800 - 43200 min | 180 - 720 hour | ||
| 1200 min @Temperature 190 °C |
20.0 hour @Temperature 374 °F |
||
| 1800 min @Temperature 170 °C |
30.0 hour @Temperature 338 °F |
||
| Shelf Life | 12.0 Month @Temperature 23.0 °C |
12.0 Month @Temperature 73.4 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Coverage | 300 ft²/gal |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID 6 NG1 GF 20 HLS PA6, 20% glass fibre, combined stability
- Lubriplate Brick Grease Specialty Lubricant and Grease
- Ferro IP 550 Thick Film Glass
- Techmer ES Luriblend® PA6 TS18 Nylon 6
- Epoxy Technology EPO-TEK® 730 General Purpose Epoxy
- Dow Corning 2-7466 RESIN
- 3M Novec™ 1710 Electronic Grade Coating
- Asahi Kasei Thermofil P-40TC-2767 40% Talc Reinforced, Heat Stabilized
- Resinoid 2018 Phenolic Molding, Fabric Reinforced
Copyright © lookpolymers.com All Rights Reserved