- HOME
- POLYMER SEARCH
- Thermoset
- Phenolic
- Phenolic, Novolac, Cellulose Filled
- Hippe PF CP 21 Cellulose Paper Reinforced Phenolic Resin - Round, Rolled Tube
Hippe PF CP 21 Cellulose Paper Reinforced Phenolic Resin - Round, Rolled Tube
| Category | Polymer , Thermoset , Phenolic , Phenolic, Novolac, Cellulose Filled |
| Manufacturer | Erhard Hippe KG |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Hippe PF CP 21 Cellulose Paper Reinforced Phenolic Resin - Round, Rolled Tube.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Used in mechanical and low-voltage electrical applications. Good electrical properties when exposed to normal relative humidity.Information provided by Hippe.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.10 - 1.20 g/cc | 1.10 - 1.20 g/cc | IEC 1212-2 7.2 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Flexural Strength | >= 80.0 MPa @Diameter >=100 mm |
>= 11600 psi @Diameter >=3.94 in |
Perpendicular to laminations; IEC 1212-2 4.1 |
| Compressive Strength | >= 80.0 MPa | >= 11600 psi | Axial; IEC 1212-2 4.2 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Insulation Resistance | >= 1.00e+6 ohm @Diameter 8.00 - 10.0 mm |
>= 1.00e+6 ohm @Diameter 0.315 - 0.394 in |
After immersion in water; IEC 1212-2 5.2 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Cohesion between layers | > 70 MPa | IEC 1212-2 4.3, Internal diameter <100 mm |
| Thermal Endurance | 120 T.I. | IEC 1212-2 7.1 |
| Water Absorption | < 10 mg/cm² | IEC 1212-2 7.1 |
Users viewing this material also viewed the following:
- S&E Specialty Polymers TufFill™ GPP3003FD Natural Flame Retardant concentrate in Polyethylene
- Malvern Minerals Sliastic 740 with 33% Novacite® L-207A Quartz Filler
- A. Schulman POLYBATCH™ PT10327 Amber Concentrate Based in PET
- ThyssenKrupp PAS 600 Structural Steel for Cold Forming
- ExxonMobil LDPE LD 600BA Low Density Polyethylene Resin (European Grade)
- Donnelly Bros HT 250 High Temperature Mold Grease
- E-Polymers TEKAMID® TA210SG30 Impact Modified, 30% Glass Fiber Reinforced PA66, DAM
- Arlon 30400R040 0.04" Uncured, Unsupported Silicone Rubber on Release Carrier
- TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 60 PHR Suprex Clay Filler
- SABIC Innovative Plastics LNP STAT-KON QD000I PA 6/10 (Asia Pacific)
Copyright © lookpolymers.com All Rights Reserved