- HOME
- POLYMER SEARCH
- Thermoset
- Melamine
- Melamine Formaldehyde, Molded, Glass Fiber Filler
- Hippe MF GC 21 Woven Glass Cloth Reinforced Melamine Resin - Round, Rolled Tube
Hippe MF GC 21 Woven Glass Cloth Reinforced Melamine Resin - Round, Rolled Tube
| Category | Polymer , Thermoset , Melamine , Melamine Formaldehyde, Molded, Glass Fiber Filler |
| Manufacturer | Erhard Hippe KG |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Hippe MF GC 21 Woven Glass Cloth Reinforced Melamine Resin - Round, Rolled Tube.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Used in mechanical and electrical applications. High mechanical strength. Good arc and tracking resistance. Information provided by Hippe.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.70 - 1.90 g/cc | 1.70 - 1.90 g/cc | IEC 1212-2 7.2 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Flexural Strength | >= 120 MPa @Diameter >=100 mm |
>= 17400 psi @Diameter >=3.94 in |
Perpendicular to laminations; IEC 1212-2 4.1 |
| Compressive Strength | >= 80.0 MPa | >= 11600 psi | Axial; IEC 1212-2 4.2 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Insulation Resistance | >= 100000 ohm @Diameter 8.00 - 10.0 mm |
>= 100000 ohm @Diameter 0.315 - 0.394 in |
After immersion in water; IEC 1212-2 5.2 |
| Dielectric Constant | <= 8.0 @Frequency 1.00e+6 Hz |
<= 8.0 @Frequency 1.00e+6 Hz |
IEC 1212-2 5.3 |
| Dielectric Breakdown | >= 10000 V @Temperature 90.0 °C, Time 20.0 sec |
>= 10000 V @Temperature 194 °F, Time 0.00556 hour |
Step-by-step test, In oil, parallel to laminations; IEC 1212-2 5.1 |
| >= 10000 V @Temperature 90.0 °C, Time 60.0 sec |
>= 10000 V @Temperature 194 °F, Time 0.0167 hour |
Proof test, In oil, parallel to laminations; IEC 1212-2 5.1 | |
| Dissipation Factor | <= 0.020 @Frequency 1.00e+6 Hz |
<= 0.020 @Frequency 1.00e+6 Hz |
IEC 1212-2 5.3 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Cohesion between layers | > 150 MPa | IEC 1212-2 4.3, Internal diameter <100 mm |
| Thermal Endurance | 130 T.I. | IEC 1212-2 7.1 |
| Water Absorption | < 5 mg/cm² | IEC 1212-2 7.1 |
Users viewing this material also viewed the following:
- Polykemi AB POLYabs P0P ABS, Plating Grade
- Ravago Manufacturing Americas Hybrid S459 ABS + Polycarbonate Alloy
- NOVA Chemicals Novapol® TF-0438-E Hexene LMDPE Film Resin
- Solvay Specialty Polymers Catalyst CT/1-LR Polyolefin
- Special Metals INCONEL® 625LCF® Nickel Superalloy (UNS N06626) Annealed 2150°F (1180°C)
- Silberline Dedusted Flake Series DF-2750 Aluminum Flake
- EMS-Grivory Grivory® XE 4107 nat PA612-GF40
- Braskem Green PE SGM9450F Blow Film Extrusion and Cast Film Extrusion High Density Polyethylene
- Anderman Ceramics EREH99 Hafnium Oxide, High Purity
Copyright © lookpolymers.com All Rights Reserved