Hexcel® HexPly® M36/NC2 180°C (350°F) Curing Epoxy Matrix, Multiaxial Fabric Laminate (NC2)

Category	Polymer , Thermoset , Epoxy , Epoxy Cure Resin
Manufacturer	Hexcel
Trade Name	HexPly®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Hexcel® HexPly® M36/NC2 180°C (350°F) Curing Epoxy Matrix, Multiaxial Fabric Laminate (NC2).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Uses Hexcel NC2 non-crimp fabric based on Tenax HTS fiber; Quasi-isotropic lay-up based on 1072 gsm quadaxial NC2 fabric (267 gsm/ply); Laminates manufactured via resin film infusionInformation provided by HexCel

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	432 MPa @Temperature 23.0 °C	62700 psi @Temperature 73.4 °F	Open Hole TS
	568 MPa @Temperature 23.0 °C	82400 psi @Temperature 73.4 °F
Tensile Modulus	52.0 GPa @Temperature 23.0 °C	7540 ksi @Temperature 73.4 °F
Compressive Yield Strength	225 MPa	32600 psi	Compression strength after impact, 30J
	270 MPa	39200 psi	Compression strength after impact, 20J
	291 MPa	42200 psi	Compression strength after impact, 6J
	474 MPa @Temperature 23.0 °C	68700 psi @Temperature 73.4 °F	Open Hole
	587 MPa @Temperature 23.0 °C	85100 psi @Temperature 73.4 °F
Shear Strength	39.0 MPa @Temperature 100 °C	5660 psi @Temperature 212 °F	Interlaminar shear
	45.0 MPa @Temperature 23.0 °C	6530 psi @Temperature 73.4 °F	Interlaminar shear

Users viewing this material also viewed the following: