- HOME
- POLYMER SEARCH
- Thermoset
- Polyester, TS
- Thermoset Polyester Glass SMC
- Haysite 46000 Polyester SMC, 30% Glass Reinforced
Haysite 46000 Polyester SMC, 30% Glass Reinforced
| Category | Polymer , Thermoset , Composite SMC , Filled/Reinforced Thermoset , Polyester, TS , Thermoset Polyester Glass SMC |
| Manufacturer | Haysite |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Haysite 46000 Polyester SMC, 30% Glass Reinforced.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The 46000 series sheet molding compound is designed for "automotive type" applications requiring good mechanical properties and low shrink characteristics.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.80 g/cc | 0.0650 lb/in³ | ASTM D572 |
| Water Absorption | 0.15 % | 0.15 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00070 cm/cm | 0.00070 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 83.0 MPa | 12000 psi | |
| Flexural Strength | 207 MPa | 30000 psi | |
| Compressive Strength | 193 MPa | 28000 psi | |
| Izod Impact, Notched | 9.90 J/cm | 18.5 ft-lb/in | edgewise; ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 130 °C | 266 °F | temperature rating |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 4.9 @Frequency 60 Hz |
4.9 @Frequency 60 Hz |
ASTM D150 |
| Dielectric Strength | 16.0 kV/mm | 406 kV/in | Perpendicular (ASTM D149), Short Time |
| Dissipation Factor | 0.0060 @Frequency 60 Hz |
0.0060 @Frequency 60 Hz |
ASTM D150 |
| Arc Resistance | 140 sec | 140 sec | ASTM D495 |
Users viewing this material also viewed the following:
- Parker Chomerics CHO-SEAL S6305 Conductive Elastomer
- LATI LAPEX A G/20 20% Glass Fiber Reinforced Polyethersulfone (PES) (UL94 V-0) (Unverified Data**)
- NOVA Chemicals Sclair® 61C Octene LLDPE Extrusion Resin (discontinued **)
- Asahi Kasei Tenac® 5012 Acetal Homopolymer (discontinued **)
- Kazanorgsintez 102-57 Low Density Polyethylene Composite, for Further Radiation Modification
- LyondellBasell Alathon® L5040 High Density Polyethylene, Blow Molding/Extrusion Grade
- Eastman Eastar MB002 Copolyester
- CLAL-MSX ARCAP Anticorrosion AP1C H14 4/4 hard, Drawn Copper Alloy
- Amity Thermosets ATS 131 Phenolic Molding Organic and graphite Filler, Compression Molded
Copyright © lookpolymers.com All Rights Reserved