- HOME
- POLYMER SEARCH
- Thermoplastic
- ABS Polymer
- Acrylonitrile Butadiene Styrene (ABS), Molded
- Hannam Chemical Hanalac 710 ABS
Hannam Chemical Hanalac 710 ABS
| Category | Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Molded |
| Manufacturer | Hannam Chemical |
| Trade Name | Hanalac |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Hannam Chemical Hanalac 710 ABS.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow | 2.9 g/10 min | 2.9 g/10 min | ASTM D1238G |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 105 | 105 | ASTM D785 |
| Tensile Strength, Ultimate | 44.0 MPa | 6380 psi | ASTM D638 |
| Elongation at Break | 30 % | 30 % | ASTM D638 |
| Flexural Yield Strength | 63.0 MPa | 9140 psi | ASTM D790 |
| Flexural Modulus | 2.25 GPa | 326 ksi | ASTM D790 |
| Izod Impact, Notched | 2.70 J/cm @Thickness 3.17 mm |
5.06 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 85.0 °C | 185 °F | Heat Distortion Temp |
| Deflection Temperature at 1.8 MPa (264 psi) | 85.0 °C | 185 °F | ASTM D648 |
| Vicat Softening Point | 95.0 °C | 203 °F | ASTM D1525 |
| Flammability, UL94 | HB | HB |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID 66 GF 15 HI PA66, 15% glass fibre
- PolyOne Versaflex™ HC MT224 Thermoplastic Elastomer (TPE)
- ExxonMobil LL 6100 Injection Molding Resin (discontinued **)
- Ineos Nova 3930 General Purpose Crystal Polystyrene (discontinued **)
- Cookson Group Plaskon® 440S Mineral Filled Novolac Epoxy Molding Compound (discontinued **)
- Lanxess Durethan® AKV 35 H3.0 000000 Nylon 66, 35% Glass Fiber
- Solvay Specialty Polymers Veradel® A-304P Polyethersulfone (PESU)
- Dow Corning 748 NON-CORROSIVE SEALANT
- Plastcom SLOVALEN PQ 83 T 40 PP, 40% mineral filling
- Teknor Apex Monprene® MP-2840E Thermoplastic Elastomer
Copyright © lookpolymers.com All Rights Reserved