- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Gouda Vuurvast VIBRON 140 Dense Vibrating Refractory Castable
Gouda Vuurvast VIBRON 140 Dense Vibrating Refractory Castable
| Category | Ceramic , Oxide , Aluminum Oxide , Silicon Oxide |
| Manufacturer | Gouda Vuurvast |
| Trade Name | VIBRON |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Gouda Vuurvast VIBRON 140 Dense Vibrating Refractory Castable.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Vibron 140 is a low cement castable, based on high quality chamotte.Remarks: Indicated values apply to vibrated products.Information provided by Gouda Vuurvast.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 2.30 - 2.40 g/cc | 0.0831 - 0.0867 lb/in³ | After drying at 110°C |
| Particle Size | <= 6000 µm | <= 6000 µm | Grain Size |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 75.0 - 85.0 MPa @Temperature 100 °C |
10900 - 12300 psi @Temperature 212 °F |
Cold Crushing Strength |
| 100 - 120 MPa @Temperature 1300 °C |
14500 - 17400 psi @Temperature 2370 °F |
Cold Crushing Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 1.10 - 1.20 W/m-K @Temperature 100 °C |
7.63 - 8.33 BTU-in/hr-ft²-°F @Temperature 212 °F |
|
| 1.13 - 1.23 W/m-K @Temperature 600 °C |
7.84 - 8.54 BTU-in/hr-ft²-°F @Temperature 1110 °F |
||
| 1.20 - 1.30 W/m-K @Temperature 1300 °C |
8.33 - 9.02 BTU-in/hr-ft²-°F @Temperature 2370 °F |
||
| Maximum Service Temperature, Air | 1400 °C | 2550 °F | |
| Shrinkage | -0.400 - 0.400 % @Temperature 1300 °C |
-0.400 - 0.400 % @Temperature 2370 °F |
Permanent Linear Change |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 47 % | 47 % | |
| Fe2O3 | 1.5 % | 1.5 % | |
| SiO2 | 47 % | 47 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Material Consumption per 1 m3 | 2300 kg | |
| Mixing Water | 5.5-6.5 liters | per 100 kgs dry material |
Users viewing this material also viewed the following:
- Polychloroprene Rubber (CR)
- KKPC KOSYN 1500S Styrene Butadiene Rubber
- Lord Adhesives Aeroglaze® 9741 Epoxy Primer/Tie-Coat
- Lanxess Durethan® BKV 50 H2.0 901510 Nylon 6, 50% Glass Fiber
- Teknor Apex Monprene® MP-2850A Thermoplastic Elastomer
- Wellman Wellamid® MRGF25/15 42H-N2/WE1705-N2 Nylon 6, 25% Mineral and 15% Glass Fiber Reinforced
- A. Schulman POLYBATCH™ Poly White P80494PF Concentrate Based In Polypropylene
- Chosun Refractories A-1 Insulating Firebrick
- 3M Scotch-Weld™ DP8810NS Low Odor Acrylic Adhesives
- Overview of materials for Polyphenylene Ether, 30% Glass Filled
Copyright © lookpolymers.com All Rights Reserved