- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Gouda Vuurvast FI 25-12 Insulating Refractory Brick
Gouda Vuurvast FI 25-12 Insulating Refractory Brick
| Category | Ceramic , Oxide , Aluminum Oxide , Silicon Oxide |
| Manufacturer | Gouda Vuurvast |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Gouda Vuurvast FI 25-12 Insulating Refractory Brick.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
This data represents average values, obtained from samples that were cut from standard bricks.Information provided by Gouda Vuurvast.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.15 - 1.25 g/cc | 0.0415 - 0.0452 lb/in³ | Apparent |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 12.0 - 16.0 MPa | 1740 - 2320 psi | Cold Crushing Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 0.300 - 0.400 W/m-K @Temperature 200 °C |
2.08 - 2.78 BTU-in/hr-ft²-°F @Temperature 392 °F |
|
| 0.340 - 0.440 W/m-K @Temperature 600 °C |
2.36 - 3.05 BTU-in/hr-ft²-°F @Temperature 1110 °F |
||
| 0.400 - 0.500 W/m-K @Temperature 1000 °C |
2.78 - 3.47 BTU-in/hr-ft²-°F @Temperature 1830 °F |
||
| Maximum Service Temperature, Air | 1250 °C | 2280 °F | |
| Shrinkage | 0.200 - 0.600 % @Temperature 1230 °C, Time 86400 sec |
0.200 - 0.600 % @Temperature 2250 °F, Time 24.0 hour |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 37 % | 37 % | |
| Fe2O3 | 2.0 % | 2.0 % | |
| SiO2 | 56 % | 56 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Segercone | 31 |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Wire & Cable JLK51L Polyvinyl Chloride, Flexible (PVC, Flexible)
- Potters Industries A-Series Premium 4MM Soda-Lime Silica Technical Quality Solid Glass Spheres
- Arlon 31580R015 0.015" (0.381 mm) Uncured Unsupported Silicone Rubber on an HDPE Carrier (discontinued *
- Karina E 898-08/175-IS-RG Beige PVC Compound
- Ineos ABS TRIAX® 1220 S ABS/Nylon Blend, As Conditioned
- Solvay Specialty Polymers Ixef® 1022 Polyarylamide (PARA), 50% Glass Fiber (Conditioned)
- Dow Corning LSPYW32 SILICONE MASTERBATCH YELLOW
- 3M 3900 Multi-Use Duct Tape
- Bhansali Engineering Abstron IM-11BM ABS Injection Molding Grade
- 3M Scotch-Weld™ DP110 Translucent Epoxy Adhesive
Copyright © lookpolymers.com All Rights Reserved