Gharda Chemicals G-PAEK™ 1200FCM Ultra High Performance PEK Polymer (discontinued **)

Category	Polymer , Thermoplastic , Polyketone , Polyaryletherketone (PAEK), Carbon Fiber Filled
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Gharda Chemicals G-PAEK™ 1200FCM Ultra High Performance PEK Polymer (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Milled carbon fiber reinforced in Poly Aryl Ether Ketone, semi-crystalline granules suitable for injection molding, easy flow, Black in colorApplication Areas: Suitable for high temperature application, where higher strength & stiffness needed in load bearing application. Excellent wear resistance. Typical applications include electronic chip carrier trays, conductive flooring, and parts for electronic business machines.

Physical Properties	Metric	English	Comments
Specific Gravity	1.42 g/cc	1.42 g/cc
Water Absorption	0.070 % @Time 86400 sec	0.070 % @Time 24.0 hour
Linear Mold Shrinkage, Flow	0.0090 cm/cm	0.0090 in/in	410°C nozzle, 220°C mold
Linear Mold Shrinkage, Transverse	0.012 cm/cm	0.012 in/in	410°C nozzle, 220°C mold

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	104	104	ASTM D785
Hardness, Shore D	87	87
Tensile Strength, Yield	160 MPa	23200 psi	ASTM D638
Elongation at Break	2.3 %	2.3 %	ASTM D638
Tensile Modulus	16.0 GPa	2320 ksi	ASTM D638
Flexural Strength	250 MPa	36300 psi	ASTM D790
Flexural Modulus	12.9 GPa	1870 ksi	ASTM D790
Izod Impact, Notched	0.350 - 0.400 J/cm	0.656 - 0.749 ft-lb/in	ASTM D256
Izod Impact, Unnotched	3.50 J/cm	6.56 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Melting Point	370 - 372 °C	698 - 702 °F	DSC
Deflection Temperature at 1.8 MPa (264 psi)	340 °C	644 °F
Glass Transition Temp, Tg	152 - 154 °C	306 - 309 °F	DSC/onset
Flammability, UL94	V-0 @Thickness 0.800 mm	V-0 @Thickness 0.0315 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+8 ohm-cm	1.00e+8 ohm-cm	ASTM D257
Surface Resistivity per Square	1.00e+6 ohm	1.00e+6 ohm	ASTM D257

Processing Properties	Metric	English
Processing Temperature	390 - 425 °C	734 - 797 °F
Nozzle Temperature	425 °C	797 °F
Mold Temperature	200 - 220 °C	392 - 428 °F
Drying Temperature	150 °C	302 °F
Dry Time	4 - 6 hour	4 - 6 hour

Descriptive Properties	Value	Comments
Hopper/ Throat Temperature	60-80°C
Nominal Granule Diameter	2.0 - 3.5 mm	Granules of uniform cut and color
Nominal Granule Length	2.0 - 4.0 mm	No longs greater than 8.0 mm

Users viewing this material also viewed the following: