Formosa Plastics Formolene® L64220UT1 Rotational Molding LLDPE (discontinued **)

Category	Polymer , Thermoplastic , Polyethylene (PE) , LLDPE , Linear Low Density Polyethylene (LLDPE), Rotational Molding Grade
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Formosa Plastics Formolene® L64220UT1 Rotational Molding LLDPE (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Hexene CopolymerApplications: Large tanks, material handling equipment and industrial rotational molding applications.Formolene L64220U is fully heat and UV stabilized.Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.Information provided by Formosa Plastics Corporation, USA.

Physical Properties	Metric	English	Comments
Density	0.942 g/cc	0.0340 lb/in³	ASTM D1505
Environmental Stress Crack Resistance	>= 500 hour	>= 500 hour	(10% Igepal), F<sub>50</sub>; ASTM D1693
	>= 1000 hour	>= 1000 hour	(100% Igepal), F<sub>50</sub>; ASTM D1693
Melt Flow	2.0 g/10 min	2.0 g/10 min	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	21.4 MPa	3100 psi	2" (50mm) per min.; ASTM D638
Elongation at Yield	11.8 %	11.8 %	2" (50mm) per min.; ASTM D638
Flexural Modulus	0.827 GPa	120 ksi	1.3mm per min; ASTM D790
Dynatup @ -30°C	81.3 J @Thickness 3.17 mm	60.0 ft-lb @Thickness 0.125 in	ARM Std. Low Temp Impact; ARM Std.

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	56.0 °C	133 °F	ASTM D648

Users viewing this material also viewed the following: