Fainplast Compounds HAX HFX 024-15C Halogen Free PVC

Category	Polymer , Thermoplastic , Vinyl (PVC) , PVC, Wire and Cable Grade
Manufacturer	Fainplast Compounds
Trade Name	HAX
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Fainplast Compounds HAX HFX 024-15C Halogen Free PVC.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

This product is a LSFOH silane grafted compound for cable insulation and sheating, cross-linkable by heat and moisture by previous addition of a suitable catalyst masterbatch. It is recommended to store seperately the grafted compound and the catalyst, as prescorching may take place during the reactive extrusion.

Physical Properties	Metric	English	Comments
Density	1.47 g/cc	0.0531 lb/in³	IEC 60811
Melt Index of Compound	2.0 g/10 min @Load 21.6 kg, Temperature 150 °C	2.0 g/10 min @Load 47.6 lb, Temperature 302 °F

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	45	45	at 15"; IEC 60811
Tensile Strength at Break	13.0 MPa	1890 psi	IEC 60811
	14.0 MPa	2030 psi	IEC 60811
Elongation at Break	200 %	200 %	IEC 60811
	220 %	220 %	after crosslinking process; IEC 60811
	0.00 % @Temperature 200 °C, Time 900 sec	0.00 % @Temperature 392 °F, Time 0.250 hour	permanent elongation after cooling; IEC 60811
	5.0 % @Temperature 250 °C, Time 900 sec	5.0 % @Temperature 482 °F, Time 0.250 hour	permanent elongation after cooling; IEC 60811
	20 % @Temperature 200 °C, Time 900 sec	20 % @Temperature 392 °F, Time 0.250 hour	elongation under load; IEC 60811
	30 % @Temperature 250 °C, Time 900 sec	30 % @Temperature 482 °F, Time 0.250 hour	elongation under load; IEC 60811

Thermal Properties	Metric	English	Comments
Oxygen Index	32 %	32 %	ISO 4589
Shrinkage	<= 2.0 % @Temperature 100 °C, Time 3600 sec	<= 2.0 % @Temperature 212 °F, Time 1.00 hour	after crosslinking; IEC 60811

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+14 ohm-cm @Temperature 20.0 °C	1.00e+14 ohm-cm @Temperature 68.0 °F	ASTM D257 Electrodes

Processing Properties	Metric	English
Zone 1	120 - 140 °C	248 - 284 °F
Zone 2	120 - 140 °C	248 - 284 °F
Zone 3	130 - 150 °C	266 - 302 °F
Zone 4	130 - 150 °C	266 - 302 °F
Die Temperature	150 - 180 °C	302 - 356 °F
Head Temperature	130 - 150 °C	266 - 302 °F

Descriptive Properties	Value	Comments
Collar Temperature (°C)	150
Emission of Halogenidric acids (%)	0.1
Knife penetration test (%)	50	@ 100°C, k=1
Water Absorption (mg/cm^2)	1.5

Users viewing this material also viewed the following: