- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LLDPE
- Linear Low Density Polyethylene (LLDPE), Injection Molded
- ExxonMobil Escorene® LL-6101 LLDPE, Injection Grade (discontinued **)
ExxonMobil Escorene® LL-6101 LLDPE, Injection Grade (discontinued **)
| Category | Polymer , Thermoplastic , Polyethylene (PE) , LLDPE , Linear Low Density Polyethylene (LLDPE), Injection Molded |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ExxonMobil Escorene® LL-6101 LLDPE, Injection Grade
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Data Provided by Exxon Chemical Canada.Characteristics: Medium Flow, High Gloss, Excellent ImpactUses: Large houseware containers, General purpose injection molding
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.925 g/cc | 0.0334 lb/in³ | ASTM D4883 |
| Environmental Stress Crack Resistance | <= 2.0 hour | <= 2.0 hour | F-50; 10% Igepal Cond. B; ASTM D-1693 |
| Linear Mold Shrinkage | 0.016 cm/cm | 0.016 in/in | Exxon Method |
| Melt Flow | 22 g/10 min @Load 2.16 kg, Temperature 190 °C |
22 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| Spiral Flow | 48.8 cm | 19.2 in | Exxon Method |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 11.0 MPa | 1600 psi | ASTM D638 |
| Elongation at Yield | 30 % | 30 % | ASTM D638 |
| Flexural Modulus | 0.211 GPa | 30.6 ksi | ASTM D790 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 122 °C | 252 °F | Exxon Method |
| Brittleness Temperature | <= -70.0 °C | <= -94.0 °F | ASTM D746 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Nozzle Temperature | 205 °C | 401 °F | Nozzle (Melt) |
Users viewing this material also viewed the following:
- Nye Lubricants 362HT (RL) Synthetic Oil
- Nye Lubricants 415 (SO) Synthetic Oil
- Quadrant EPP Fluorosint® HPV PTFE + additives, bearing grade, compression moulded (ISO Data)
- MetaFoam Copper Foam
- Michelman® Michem® Prime 4990R Ethylene acrylic acid dispersion
- Kraton® D1155 E (SBS) Liner Block Copolymer
- Solvay Specialty Polymers Amodel® AT-1125 HS Polyphthalamide (PPA), 25% Glass Fiber (Dry)
- ExxonMobil Exact™ 9061 Ethylene-based Plastomer Resin
- CLAL-MSX NICLAL 1300 H12 1/2 Hard Copper Alloy, Free Cutting Nickel-Silver
- China Tungsten STG30-15 PM Structural Parts
Copyright © lookpolymers.com All Rights Reserved