E-Polymers SEPAZ® K365GM 60% Glass Fiber/Calcium Carbonate Reinforced General Purpose PPS Resin

Category	Polymer , Thermoplastic , Polyphenylene Sulfide (PPS)
Manufacturer	E-Polymers Co. Ltd.
Trade Name	SEPAZ®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	E-Polymers SEPAZ® K365GM 60% Glass Fiber/Calcium Carbonate Reinforced General Purpose PPS Resin.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Polyphenylene Sulfide Resin: High-performance engineering plastic SEPAZ PPS boasts excellent high-temperature resistance, flame retardancy and chemical resistance, physical strength, and its fluidity leads to good dimensional precision. SEPAZ PPS applications: switches, connectors and other electronic and electric components, alternators and other automobile components, and office equipment components including chassis parts and housings.Information Provided by E-Polymers Co., Ltd.

Physical Properties	Metric	English	Comments
Specific Gravity	1.96 g/cc	1.96 g/cc	ASTM D792
Water Absorption	0.020 % @Time 86400 sec	0.020 % @Time 24.0 hour
Linear Mold Shrinkage	0.0010 - 0.0020 cm/cm	0.0010 - 0.0020 in/in
Linear Mold Shrinkage, Transverse	0.0030 - 0.0050 cm/cm	0.0030 - 0.0050 in/in

Mechanical Properties	Metric	English	Comments
Tensile Strength	131.5 MPa	19070 psi	ASTM D638
Elongation at Break	1.0 %	1.0 %	ASTM D638
Flexural Strength	189.33 MPa	27460 psi	ASTM D790
Flexural Modulus	18.84 GPa	2732 ksi	ASTM D790
Izod Impact, Notched	0.422 J/cm	0.790 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	18.0 µm/m-°C @Thickness 1.60 mm	10.0 µin/in-°F @Thickness 0.0630 in	ASTM D696
CTE, linear, Transverse to Flow	31.0 µm/m-°C @Thickness 1.60 mm	17.2 µin/in-°F @Thickness 0.0630 in	ASTM D696
Melting Point	280 °C	536 °F	ASTM D789
Deflection Temperature at 1.8 MPa (264 psi)	266 °C	511 °F	ASTM D648
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	ASTM D257
Dielectric Constant	4.1 @Frequency 1.00e+6 Hz	4.1 @Frequency 1.00e+6 Hz	ASTM D150
Dielectric Strength	0.450 kV/mm @Thickness 1.60 mm	11.4 kV/in @Thickness 0.0630 in	ASTM D149
Dissipation Factor	0.010 @Frequency 1.00e+6 Hz	0.010 @Frequency 1.00e+6 Hz	ASTM D150

Processing Properties	Metric	English
Melt Temperature	300 - 330 °C	572 - 626 °F
Mold Temperature	130 - 160 °C	266 - 320 °F
Drying Temperature	140 °C	284 °F
Dry Time	6 hour	6 hour

Users viewing this material also viewed the following: