POLYMER SEARCH

Constellium Planoxal® 50 Aluminum plate

Category	Metal , Nonferrous Metal , Aluminum Alloy , 5000 Series Aluminum Alloy
Manufacturer	Constellium
Trade Name	Planoxal®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Constellium Planoxal® 50 Aluminum plate.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Planoxal®-50 plates differ from other standard EN-AW 5083 alloy products by their low level of residual stress. This specialty plate is also suitable for decorative anodizing. Planoxal®-50 is mainly used for low stressed, intensively machined and anodized machine elements. Applications include packaging, printing and food conditioning machines.Information provided by manufacturer

Physical Properties	Metric	English	Comments
Density	2.66 g/cc	0.0961 lb/in³

Mechanical Properties	Metric	English	Comments
Hardness, Brinell	75 @Thickness 20.0 - 100 mm	75 @Thickness 0.787 - 3.94 in
	77 @Thickness 8.00 - 20.0 mm	77 @Thickness 0.315 - 0.787 in
Tensile Strength	>= 260 MPa @Thickness 80.0 - 100 mm	>= 37700 psi @Thickness 3.15 - 3.94 in	Tempers O/H111; Standard EN 485-2
	>= 270 MPa @Thickness 8.00 - 12.5 mm	>= 39200 psi @Thickness 0.315 - 0.492 in	Tempers O/H111; Standard EN 485-2
	>= 270 MPa @Thickness 12.5 - 50.0 mm	>= 39200 psi @Thickness 0.492 - 1.97 in	Tempers O/H111; Standard EN 485-2
	>= 270 MPa @Thickness 50.0 - 80.0 mm	>= 39200 psi @Thickness 1.97 - 3.15 in	Tempers O/H111; Standard EN 485-2
	295 MPa @Thickness 8.00 - 20.0 mm	42800 psi @Thickness 0.315 - 0.787 in	Typical Strength
	295 MPa @Thickness 20.0 - 100 mm	42800 psi @Thickness 0.787 - 3.94 in	Typical Strength
Tensile Strength, Yield	>= 110 MPa @Strain 0.200 %, Thickness 80.0 - 100 mm	>= 16000 psi @Strain 0.200 %, Thickness 3.15 - 3.94 in	Tempers O/H111; Standard EN 485-2
	>= 115 MPa @Strain 0.200 %, Thickness 8.00 - 12.5 mm	>= 16700 psi @Strain 0.200 %, Thickness 0.315 - 0.492 in	Tempers O/H111; Standard EN 485-2
	>= 115 MPa @Strain 0.200 %, Thickness 12.5 - 50.0 mm	>= 16700 psi @Strain 0.200 %, Thickness 0.492 - 1.97 in	Tempers O/H111; Standard EN 485-2
	>= 115 MPa @Strain 0.200 %, Thickness 50.0 - 80.0 mm	>= 16700 psi @Strain 0.200 %, Thickness 1.97 - 3.15 in	Tempers O/H111; Standard EN 485-2
	140 MPa @Strain 0.200 %, Thickness 20.0 - 100 mm	20300 psi @Strain 0.200 %, Thickness 0.787 - 3.94 in	Typical Strength
	150 MPa @Strain 0.200 %, Thickness 8.00 - 20.0 mm	21800 psi @Strain 0.200 %, Thickness 0.315 - 0.787 in	Typical Strength
Elongation at Break	>= 12 % @Thickness 80.0 - 100 mm	>= 12 % @Thickness 3.15 - 3.94 in	Tempers O/H111; Standard EN 485-2
	>= 14 % @Thickness 50.0 - 80.0 mm	>= 14 % @Thickness 1.97 - 3.15 in	Tempers O/H111; Standard EN 485-2
	>= 15 % @Thickness 12.5 - 50.0 mm	>= 15 % @Thickness 0.492 - 1.97 in	Tempers O/H111; Standard EN 485-2
	>= 16 % @Thickness 8.00 - 12.5 mm	>= 16 % @Thickness 0.315 - 0.492 in	Tempers O/H111; Standard EN 485-2
	23 % @Thickness 8.00 - 20.0 mm	23 % @Thickness 0.315 - 0.787 in	Typical Elongation
	23 % @Thickness 20.0 - 100 mm	23 % @Thickness 0.787 - 3.94 in	Typical Elongation
Modulus of Elasticity	71.0 GPa	10300 ksi

Thermal Properties	Metric	English	Comments
CTE, linear	23.8 µm/m-°C @Temperature 20.0 - 100 °C	13.2 µin/in-°F @Temperature 68.0 - 212 °F
Thermal Conductivity	105 - 120 W/m-K	729 - 833 BTU-in/hr-ft²-°F

Component Elements Properties	Metric	English	Comments
Aluminum, Al	92.55 - 95.55 %	92.55 - 95.55 %	as balance
Chromium, Cr	0.050 - 0.25 %	0.050 - 0.25 %
Copper, Cu	<= 0.10 %	<= 0.10 %
Iron, Fe	<= 0.40 %	<= 0.40 %
Magnesium, Mg	4.0 - 4.9 %	4.0 - 4.9 %
Manganese, Mn	0.40 - 1.0 %	0.40 - 1.0 %
Silicon, Si	<= 0.40 %	<= 0.40 %
Zinc, Zn	<= 0.25 %	<= 0.25 %
Zr+Ti	<= 0.15 %	<= 0.15 %

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.00000590 - 0.00000660 ohm-cm	0.00000590 - 0.00000660 ohm-cm

Users viewing this material also viewed the following: