- HOME
- POLYMER SEARCH
- Pure Element
- California Fine Wire Nickel 5900 Nickel Alloy
California Fine Wire Nickel 5900 Nickel Alloy
| Category | Metal , Nonferrous Metal , Nickel Alloy , Pure Element |
| Manufacturer | California Fine Wire |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | California Fine Wire Nickel 5900 Nickel Alloy.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
All values may vary dependent on specific design and usageCapabilities: WireRibbonSquareInsulatedPlatedInformation provided by California Fine Wire.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.91 g/cc | 0.322 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 345 MPa | 50000 psi | Annealed |
| 552 MPa | 80000 psi | Stress relieved | |
| 689 MPa | 100000 psi | Hard |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 15.0 µm/m-°C @Temperature 20.0 °C |
8.33 µin/in-°F @Temperature 68.0 °F |
|
| Specific Heat Capacity | 0.460 J/g-°C @Temperature 20.0 °C |
0.110 BTU/lb-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 59.0 W/m-K | 409 BTU-in/hr-ft²-°F | |
| Melting Point | 1450 °C | 2642 °F | |
| Maximum Service Temperature, Air | 932 °C | 1710 °F | Operating Temperature |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Nickel, Ni | 99.98 % | 99.98 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.00000748 ohm-cm | 0.00000748 ohm-cm | 3% tolerance on sizes below 0.02, 5% tolerance on sizes above 0.02 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Magnetic | Strong | |
| Temperature Coefficient of Resistance | 0.0059 ohms/ohm-°C | 0-100°C |
| Thermal EMF vs. Copper | -0.022 |
Users viewing this material also viewed the following:
- Polymax® Maxelast® P1865A TPE, PP Overmold or Standalone use
- Pau Tai UNINOX AM-929 Acrylic Impact Modifier
- Shakespeare WN-18 diameter 0.2 mm Nylon 6 Monofilament
- SABIC Innovative Plastics Ultem XH6050F PEI Copolymer (Europe-Africa-Middle East)
- SPS Guang Zhou SAMATâ„¢ 5000A Flame-retarded Polypropylene
- Polyram PlusTek RD101 Nylon 12, Injection Molding
- Saint-Gobain Meldin® 1277 Thermoplastic Bearing Material
- Industeel CREUSABRO® 8000 High Performance Wear Resistant Steel
- BASF Ultramid® KR 4357 G6 30% Glass Filled PA6/6T (Conditioned)
Copyright © lookpolymers.com All Rights Reserved