- HOME
- POLYMER SEARCH
- Nonferrous Metal
- Refractory Metal
- CMW® THERMKON® 65M Molybdenum Copper parts
CMW® THERMKON® 65M Molybdenum Copper parts
| Category | Metal , Metal Matrix Composite , Nonferrous Metal , Molybdenum Alloy , Refractory Metal |
| Manufacturer | CMW Inc. |
| Trade Name | THERMKON® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | CMW® THERMKON® 65M Molybdenum Copper parts.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
For matching CTE of semiconductor substrates while allowing high thermal transfer.Information provided by CMW Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 9.92 g/cc | 0.358 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell B | 95 | 95 | |
| Tensile Strength, Ultimate | 723 MPa | 105000 psi | |
| Tensile Strength, Yield | 655 MPa | 95000 psi | |
| Modulus of Elasticity | 248 GPa | 36000 ksi | |
| Flexural Modulus | 1.137 GPa | 164.9 ksi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 6.50 µm/m-°C @Temperature 20.0 °C |
3.61 µin/in-°F @Temperature 68.0 °F |
|
| Specific Heat Capacity | 0.260 J/g-°C | 0.0621 BTU/lb-°F | |
| Thermal Conductivity | 140 W/m-K | 972 BTU-in/hr-ft²-°F | |
| Melting Point | 1080 - 2610 °C | 1980 - 4730 °F | |
| Solidus | 1080 °C | 1980 °F | |
| Liquidus | 2610 °C | 4730 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Copper, Cu | 15 % | 15 % | |
| Molybdenum, Mo | 85 % | 85 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.00000616 ohm-cm | 0.00000616 ohm-cm | (28% IACS) |
Users viewing this material also viewed the following:
- Lotte Chemical Titan TITANCEED® mL156 Linear low density polyethylene resin (discontinued **)
- Stir SpA SR 80 3 (PVC)
- Tra-Con Tra-Bond 724-5 Low Viscosity Polyurethane Adhesive
- Dow Corning FZ-2233
- Fainplast Compounds GS 7004 Flexible PVC, Injection Molding for Footwear
- Clariant Renol PA133GN-109 Nylon 66, High Impact, Heat Stabilized, Lubricated
- Fainplast Compounds MPH 75 Medical Flexible PVC, Extrusion
- BASF Procom® D 1012 Polypropylene
Copyright © lookpolymers.com All Rights Reserved