- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Injection Molded
- Braskem JV060U Injection Molding High Density Polyethylene
Braskem JV060U Injection Molding High Density Polyethylene
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded |
| Manufacturer | Braskem |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Braskem JV060U Injection Molding High Density Polyethylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Boxes for beverages bottles; Boxes in general; Technical parts.Information provided by Braskem.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.957 g/cc | 0.957 g/cc | ASTM D1505/D792 |
| ESCR 100% Igepal® | 15 hour @Temperature 50.0 °C |
15 hour @Temperature 122 °F |
h/50%f; compression molded 2 mm notched-plaques; ASTM D1683 |
| ESCR 10% Igepal® | 10 hour @Temperature 50.0 °C |
10 hour @Temperature 122 °F |
h/50%f; compression molded 2 mm notched-plaques; ASTM D1683 |
| Melt Flow | 7.0 g/10 min @Load 2.16 kg, Temperature 190 °C |
7.0 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 65 | 65 | ASTM D2240 |
| Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
| Flexural Modulus, 1% Secant | 1360 MPa | 197000 psi | ASTM D790 |
| Izod Impact, Notched | 0.360 J/cm | 0.674 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 71.0 °C | 160 °F | ASTM D648 |
| Vicat Softening Point | 125 °C | 257 °F | ASTM D1525 |
Users viewing this material also viewed the following:
- TSE Industries Millathane® CM Millable Polyether Urethane Rubber, 0.20 PHR Caytur 4
- Lehmann & Voss LUVOCOM® 1-7789/EG Polyamide 66, with carbon fiber, lubricant modified, heat stabilized
- Solvay Specialty Polymers Amodel® AS-4133 HS Polyphthalamide (PPA), 33% Glass Fiber (Conditioned)
- SABIC Innovative Plastics LNP LUBRICOMP EP003 PEI
- A. Schulman INVISION™ VX-5065UI Soft Touch Polyolefin Thermoplastic
- Crucible Steel Cru-Wear® Tool Steel
- AK Steel 321 Austenitic Stainless steel
- Arlon 41580XC015 0.015" Uncured, Unsupported Silicone Rubber on Release Carrier
- A. Schulman POLYFORT™ FXP 6630 Nylon 6.6 Polypropylene Alloy
Copyright © lookpolymers.com All Rights Reserved