- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Braskem H 605 Thermoforming Polypropylene
Braskem H 605 Thermoforming Polypropylene
| Category | Polymer , Thermoplastic , Polypropylene (PP) |
| Manufacturer | Braskem |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Braskem H 605 Thermoforming Polypropylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Applications: Flat and corrugated sheets with high transparency; thermoformed packing with high transparency. Information provided by Braskem
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.905 g/cc | 0.0327 lb/in³ | ASTM D792A |
| Melt Flow | 2.1 g/10 min @Load 2.16 kg, Temperature 230 °C |
2.1 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238L |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 93 | 93 | ASTM D785 |
| Tensile Strength, Yield | 39.0 MPa | 5660 psi | ASTM D638 |
| Elongation at Yield | 9.0 % | 9.0 % | ASTM D638 |
| Flexural Modulus | 1.96 GPa | 284 ksi | ASTM D790 |
| Izod Impact, Notched | 0.390 J/cm @Temperature 23.0 °C |
0.731 ft-lb/in @Temperature 73.4 °F |
ASTM D256A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 106 °C | 223 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 60.0 °C | 140 °F | ASTM D648 |
| Vicat Softening Point | 152 °C | 306 °F | -1kg; ASTM D1525 |
Users viewing this material also viewed the following:
- PPT LSF120 Low Sintering Temperature Ferrite Powder
- DSM Akulon® F223-DH (Dry) Low/Medium Viscosity, Heat Stabilized Nylon 6 (North America) (discontinued **)
- Solvay Chemicals COF2 Carbonyl difluoride
- Stellarchem AB845EM TPE Compound
- Solvay TECHNYL® A 216 PA66, DRY
- CeramTec MZ 429 Zirconia, ZrO2-Y2O3
- Arlon 514B12R006 0.006" Cured Silicone Rubber with Fiberglass Substrate
- ATI Allegheny Ludlum AL 409 Cb™ Brazeable Ferritic Stainless Steel, 8.5% Cold Work
- ATI Allegheny Ludlum Stainless Steel Chromium-Nickel Type 304L, 30% Cold Rolled (UNS S30403)
Copyright © lookpolymers.com All Rights Reserved