- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LLDPE
- Linear Low Density Polyethylene (LLDPE), Film Grade
- BiologiQ ESR-PE EcoStarch mLLDPE Blend
BiologiQ ESR-PE EcoStarch mLLDPE Blend
| Category | Polymer , Renewable/Recycled Polymer , Thermoplastic , Polyethylene (PE) , LLDPE , Linear Low Density Polyethylene (LLDPE), Film Grade |
| Manufacturer | BiologiQ |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | BiologiQ ESR-PE EcoStarch mLLDPE Blend.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Properties of 70% mLLDPE, 25% ESR, 5% additive blend - thin filmInformation provided by BiologiQ
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
| Water Vapor Transmission | 24.0 - 30.0 g/m²/day | 1.55 - 1.93 g/100 in²/day | 100% RH; 39°C |
| Oxygen Transmission | 84.4 - 96.0 cc-mm/m²-24hr-atm | 214 - 244 cc-mil/100 in²-24hr-atm | 0% RH |
| Melt Flow | 0.47 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.47 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Film Elongation at Break, MD | 605 - 659 % | 605 - 659 % | ASTM D882 |
| Film Elongation at Break, TD | 632 - 696 % | 632 - 696 % | ASTM D882 |
| Elmendorf Tear Strength, MD | 14.2 - 19.4 g/micron | 360 - 494 g/mil | ASTM D1922 |
| Elmendorf Tear Strength, TD | 22.8 - 28.5 g/micron | 580 - 724 g/mil | ASTM D1922 |
| Dart Drop | 11.8 - 13.4 g/micron | 300 - 340 g/mil | ASTM D1709 |
| Film Tensile Strength at Break, MD | 0.0283 - 0.0338 MPa | 4.10 - 4.90 psi | ASTM D882 |
| Film Tensile Strength at Break, TD | 0.0248 - 0.0345 MPa | 3.60 - 5.00 psi | ASTM D882 |
| Heat Seal Strength | 1400 g/25 mm | 3.09 lb/in | 40 PSI; 0.5 SEC |
| Heat Seal Strength Initiation Temperature | 130 - 180 °C | 266 - 356 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 130 °C | 266 °F | ASTM D3418 |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Transmission, Visible | 2.0 - 4.0 % | 2.0 - 4.0 % | ASTM D1746 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Moisture Content | >= 0.35 % | >= 0.35 % | ASTM D6980 |
Users viewing this material also viewed the following:
- MV Labs FE1000 FeSO4·7H2O Iron(II) sulfate heptahydrate
- Precision Polymer Engineering N50M Nitrile Rubber
- P & P Technology Polyester Polyurethane Foam
- BASF Master Builders Solutions ChemRex® CX-25 Polyurethane Adhesive/Sealant (discontinued **)
- Yparex 8125 Polyolefin Adhesive Resin
- Huntsman HZ 340 Polyamide
- Lushan H-4 Adhesive Resin for Aluminum Plastic Composite Pipe
- A. Schulman PAPERMATCH® T-4338/50 Specialty Masterbatch
Copyright © lookpolymers.com All Rights Reserved