- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Polyester TPE
- Barlog Plastics KEBAFLEX P D72.1 Polyester-Elastomer, Shore D75
Barlog Plastics KEBAFLEX P D72.1 Polyester-Elastomer, Shore D75
| Category | Polymer , Thermoplastic , Elastomer, TPE , Polyester TPE , Polyester, TP |
| Manufacturer | Barlog Plastics |
| Trade Name | KEBAFLEX |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Barlog Plastics KEBAFLEX P D72.1 Polyester-Elastomer, Shore D75.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
TPC-ETInformation provided by BARLOG plastics GmbH.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.27 g/cc | 0.0459 lb/in³ | ISO 1183 |
| Linear Mold Shrinkage, Flow | 0.016 cm/cm | 0.016 in/in | ISO 294-4 |
| Linear Mold Shrinkage, Transverse | 0.017 cm/cm | 0.017 in/in | ISO 294-4 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 75 | 75 | |
| Tensile Strength at Break | 39.0 MPa | 5660 psi | ISO 527-1 |
| Elongation at Break | >= 400 % | >= 400 % | ISO 527-1 |
| Charpy Impact, Notched | 1.60 J/cm² | 7.61 ft-lb/in² | ISO 179-1eA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 218 °C | 424 °F | 10°C/min; ISO 11357-1/-3 |
| Deflection Temperature at 0.46 MPa (66 psi) | 148 °C | 298 °F | ISO 75-1/-2 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Resin Type | TPC-ET |
Users viewing this material also viewed the following:
- Solvay Specialty Polymers Solef® 9007 Polyvinylidene Fluoride (PVDF)
- A. Schulman PAPERMATCH® H-3818 Specialty Masterbatch
- Wanhua Chemical Wanthane® WHT-A895 Aliphatic TPU
- Westlake EF4060 Low Density Polyethylene
- Dow C702-20 Polypropylene Impact Copolymer
- Eurofoam Porocell POR 304 CM-OPC EPDM Foam
- E-Polymers TEKAMID® TB120G15 , 15% Glass Fiber Reinforced PA6, DAM
- Arlon 55103R030 0.030" (0.762 mm) Cured Silicone Rubber with Fiberglass Substrate
- Ametek Ultra 304L P/M Stainless Steel, Sintered from 6.38 g/cc Green Density
- Arlon 44278R018B 0.018" Uncured/Cured/Uncured Silicone Rubber Laminate with Fiberglass Substrate
Copyright © lookpolymers.com All Rights Reserved