POLYMER SEARCH

BCC Products BC 7009-1 Epoxy Casting

Category	Polymer , Thermoset , Epoxy
Manufacturer	BCC Products
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BCC Products BC 7009-1 Epoxy Casting.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

BC 7009-1 is an iron filled, low-cost mass casting system. Thicknesses up to two inches in non-conductive molds, and four inches in conductive molds can be achieved without foaming or yielding excessive shrinkage. Ideal for stretch forms, patterns, dies, molds, duplications, prototypes, etc.Information provided by BCC Products, Inc.

Physical Properties	Metric	English	Comments
Specific Gravity	2.24 g/cc	2.24 g/cc
Brookfield Viscosity	20000 cP @Temperature 23.9 °C	20000 cP @Temperature 75.0 °F	Mixed
Linear Mold Shrinkage	0.0010 cm/cm	0.0010 in/in

Mechanical Properties	Metric	English
Hardness, Shore D	87 @Temperature 23.9 °C	87 @Temperature 75.0 °F
Tensile Strength, Ultimate	42.7 MPa	6200 psi
Flexural Strength	53.8 MPa	7800 psi
Flexural Modulus	6.76 GPa	980 ksi
Compressive Strength	102 MPa	14800 psi

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	58.9 °C	138 °F

Processing Properties	Metric	English	Comments
Cure Time	960 min @Temperature 24.0 °C	16.0 hour @Temperature 75.2 °F
Pot Life	90 min @Temperature 24.0 °C	90 min @Temperature 75.2 °F	2 lb. mass

Descriptive Properties	Value	Comments
Machinability	Good
Mix Ratio	100:10 by weight, 100:26 by volume, resin/harder

Users viewing this material also viewed the following: