- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- Aremco Aremco-Bond™ 820 High Performance Epoxide
Aremco Aremco-Bond™ 820 High Performance Epoxide
| Category | Polymer , Adhesive , Thermoset , Epoxy |
| Manufacturer | Aremco |
| Trade Name | Aremco-Bond™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Aremco-Bond™ 820 High Performance Epoxide.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Clear, 1:1, 45-Minute Cure System with Good Flexibility
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.15 g/cc | 1.15 g/cc | |
| Viscosity | 12000 cP | 12000 cP | Mixed Viscosity |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 65 | 65 | |
| Flexural Strength | 55.2 MPa | 8000 psi | ASTM D790 |
| Shear Strength | 8.27 MPa | 1200 psi | ASTM D1002-94 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 28.8 µm/m-°C @Temperature 20.0 °C |
16.0 µin/in-°F @Temperature 68.0 °F |
|
| Maximum Service Temperature, Air | 200 °C | 392 °F | |
| Minimum Service Temperature, Air | -50.0 °C | -58.0 °F | |
| Shrinkage | 0.80 % | 0.80 % | Cure Shrinkage |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 2.00e+14 ohm-cm | 2.00e+14 ohm-cm | |
| Dielectric Constant | 6.0 @Frequency 1000 Hz |
6.0 @Frequency 1000 Hz |
|
| Dielectric Strength | 33.9 kV/mm | 860 kV/in | |
| Dissipation Factor | 0.040 | 0.040 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 45.0 min @Temperature 23.0 °C |
0.750 hour @Temperature 73.4 °F |
|
| Pot Life | 15.0 min @Temperature 25.0 °C |
15.0 min @Temperature 77.0 °F |
100 gm mass |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Chemical Resistance | Excellent | |
| Color | Clear | |
| Mix Ratio By Weight | 1:1 | resin:hardener |
Users viewing this material also viewed the following:
- Overview of materials for Acetal Copolymer, Steel Filled
- Saint-Gobain CHR® M852 Polyester Film Backing Natural Rubber Adhesive Pressure Sensitive Tape
- SABIC Innovative Plastics LNP THERMOCOMP HB006 PA 11 (Asia Pacific)
- SABIC Innovative Plastics LNP THERMOCOMP PF006U PA 6 (Asia Pacific)
- Wellman Wellamid® 42LN2-NBK2 Nylon 6, General Purpose
- China Tungsten ST1645 PM Antifriction Parts
- Aclo Accutech Polypropylene Copolymer CP0436C10L Calcium Reinforced
- BASF Lupranate® 278 Isocyanate
- Austin Novel Materials Texalan® 959A Polyether-based TPU
- BASF Ultramid® B3WG5 BK 00654 PA6 25% Glass Filled BK (Dry)
Copyright © lookpolymers.com All Rights Reserved