- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- Polycarbonate, Molded
- Adell DS-10 General Purpose Polycarbonate
Adell DS-10 General Purpose Polycarbonate
| Category | Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, Molded |
| Manufacturer | Adell Plastics, Inc. |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Adell DS-10 General Purpose Polycarbonate.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.20 g/cc | 1.20 g/cc | ASTM D792 |
| Water Absorption | 0.25 % | 0.25 % | 24 hr immersion; ASTM D570 |
| Linear Mold Shrinkage | 0.0060 cm/cm | 0.0060 in/in | ASTM D955 |
| Melt Flow | 9.0 - 11 g/10 min @Load 1.20 kg, Temperature 300 °C |
9.0 - 11 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 70 | 70 | ASTM D785 |
| Tensile Strength, Ultimate | 69.0 MPa | 10000 psi | ASTM D638 |
| Elongation at Break | 130 % | 130 % | ASTM D638 |
| Flexural Strength | 96.5 MPa | 14000 psi | ASTM D790 |
| Flexural Modulus | 2.34 GPa | 339 ksi | ASTM D790 |
| Izod Impact, Notched | 8.01 J/cm @Thickness 3.17 mm |
15.0 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 138 °C | 280 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | ASTM D648 |
Users viewing this material also viewed the following:
- Premix Thermoplastics PREBLACK CP 731-40 Black Universal Masterbatch, 40% Carbon Black
- KB Alloys 33% Copper Aluminum Alloy
- Haynes 214® alloy, 40% cold reduction, 980°C (1800°F) for 5 minutes
- Haysite HST-II Glass Reinforced Polyester Sheet, Electrical Grade
- COI Ceramics Nextel™ AS-N720 Oxide Ceramic Matrix Composite, Aluminosilicate
- AK Steel ZINCGRIP® Hot Dip Galvanized Carbon Steel, Extra Deep Drawing Steel (EDDS), Standard Grade
- 3M 551 Polyurethane Adhesive Sealant
- Unipetrol PP MONSTEN® GB 107 Polypropylene Homopolymer
- DSM Arnite® TV4 440 KL PBT/PET Blend-20% Glass Reinforced (European Grade) (discontinued **)
Copyright © lookpolymers.com All Rights Reserved