- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Polytetrafluoroethylene (PTFE), Bronze Filled
- Adamas Adalon® 805 PTFE, 40% Bronze
Adamas Adalon® 805 PTFE, 40% Bronze
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Bronze Filled |
| Manufacturer | Adamas |
| Trade Name | Adalon® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Adamas Adalon® 805 PTFE, 40% Bronze.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Adamas, HPM
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 3.07 - 3.10 g/cc | 3.07 - 3.10 g/cc | ASTM D792 |
| Water Absorption | 0.020 % | 0.020 % | ASTM D570 |
| Deformation | 7.0 - 9.9 % | 7.0 - 9.9 % | Permanent deformation after 24 hrs @ 23°C; ASTM D621 |
| 7.0 - 10 % | 7.0 - 10 % | ASTM D621 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 58 - 62 | 58 - 62 | ASTM D2240 |
| Tensile Strength at Break | >= 20.0 MPa | >= 2900 psi | ASTM D4745-11 |
| Elongation at Break | >= 200 % | >= 200 % | ASTM D4745-11 |
| Coefficient of Friction, Dynamic | 0.14 - 0.16 | 0.14 - 0.16 | ASTM D1894 |
| Coefficient of Friction, Static | 0.16 - 0.18 | 0.16 - 0.18 | ASTM D1894 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 0.350 W/m-K | 2.43 BTU-in/hr-ft²-°F | ASTM C 177 |
| Melting Point | 327 °C | 621 °F | DSC |
| Maximum Service Temperature, Air | 260 °C | 500 °F | DSC |
| Minimum Service Temperature, Air | -140 °C | -220 °F | DSC |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+7 ohm-cm | 1.00e+7 ohm-cm | ASTM D257 |
| Surface Resistance | 1e+05 | 1e+05 | ASTM D257 |
Users viewing this material also viewed the following:
- MV Labs NA1000 Na2SO4 Sodium sulfate
- Pyrotek TS-85 Thermoset Electrical Insulation Product (Nema Grade: L)
- Polykemi AB SCANMID 6 B12^ Nylon 6
- Materion BrushBronze® 630 (AMS 4640) 2.0" - 3.0"
- Solvay Specialty Polymers Amodel® A-8422 LS WH159 Polyphthalamide (PPA), 22% Mineral
- Denka MALECCA K-400 ABS
- Azdel SuperLite® SL551000-100 PP Resin Matrix / 55% Glass Fiber (3 mm Molded Thickness)
- Arlon 31970XA015 Silicone Rubber Laminate
- 3M Scotchcal™ 3632-97 Translucent Film
Copyright © lookpolymers.com All Rights Reserved