- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Adamas Adalon® 433 PTFE, 10% Ekonol®
Adamas Adalon® 433 PTFE, 10% Ekonol®
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE |
| Manufacturer | Adamas |
| Trade Name | Adalon® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Adamas Adalon® 433 PTFE, 10% Ekonol®.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Adamas, HPM
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.95 - 2.05 g/cc | 1.95 - 2.05 g/cc | ASTM D792 |
| Deformation | 2.0 - 3.8 % | 2.0 - 3.8 % | ASTM D621 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 50 - 54 | 50 - 54 | ASTM D2240 |
| Ball Indentation Hardness | 56.0 - 60.0 MPa | 8120 - 8700 psi | ISO 2032-N132 |
| Tensile Strength at Break | >= 20.0 MPa | >= 2900 psi | ASTM D4745-11 |
| Elongation at Break | >= 250 % | >= 250 % | ASTM D4745-11 |
| Coefficient of Friction, Static | 0.10 - 0.30 | 0.10 - 0.30 | ASTM D1894 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 0.350 W/m-K | 2.43 BTU-in/hr-ft²-°F | ASTM C 177 |
| Melting Point | 327 °C | 621 °F | DSC |
| Maximum Service Temperature, Air | 230 °C | 446 °F | DSC |
| Minimum Service Temperature, Air | -50.0 °C | -58.0 °F | DSC |
| Flammability, UL94 | V-0 | V-0 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+18 ohm-cm | 1.00e+18 ohm-cm | ASTM D257 |
| Surface Resistance | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
| Dielectric Constant | 2.0 @Frequency 60.0 - 2.00e+6 Hz |
2.0 @Frequency 60.0 - 2.00e+6 Hz |
ASTM D150 |
| Dielectric Strength | 25.0 - 40.0 kV/mm | 635 - 1020 kV/in | ASTM D149 |
Users viewing this material also viewed the following:
- Ovation Polymers Opnyl OP66UT105 Nylon 66
- Freudenberg Simrit N470 Hydrocarbon Elastomer Nitrile
- Taiwan Sheen Soon Sheenthane® A8557E2 Thermoplastic Polyurethane Elastomer
- Samyang Trirex® 3000H Polycarbonate, Low-temperature Impact
- Chase Plastics CP Pryme® NN133GTL (COND, 50% RH) Nylon 66, 33% Glass Fiber Reinforced, Toughened, Internally Lubricated
- A. Schulman PP 2407 Polypropylene Impact Resistant Copolymer Polypropylene
- DSM Akulon® S223-G2U (Cond.) 13% Glass Reinforced Nylon 66 (North America)
- Aclo Accutech Polyethylene HD0234G20UVL High Density Glass Reinforced UV Stabilized
- Ashley Polymers Ashlene® 982 Nylon 612
- Master Bond EP30M4LV Chemically Resistant, Low Viscosity Adhesive
Copyright © lookpolymers.com All Rights Reserved