- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene Copolymer
- Aclo Accucomp Polypropylene CPO407L Copolymer
Aclo Accucomp Polypropylene CPO407L Copolymer
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene Copolymer |
| Manufacturer | Aclo Compounders |
| Trade Name | Accucomp |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aclo Accucomp Polypropylene CPO407L Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.900 g/cc | 0.0325 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.012 cm/cm | 0.012 in/in | MD; ASTM D955 |
| Melt Flow | 20 g/10 min | 20 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 60 | 60 | ASTM D785 |
| Tensile Strength at Break | 13.0 MPa | 1890 psi | ASTM D638 |
| Tensile Strength, Yield | 18.0 MPa | 2610 psi | ASTM D638 |
| Elongation at Break | 60 % | 60 % | ASTM D638 |
| Elongation at Yield | 6.0 % | 6.0 % | ASTM D638 |
| Tensile Modulus | 0.800 GPa | 116 ksi | ASTM D638 |
| Flexural Strength | 21.0 MPa | 3050 psi | ASTM D790 |
| Flexural Modulus | 0.800 GPa | 116 ksi | ASTM D790 |
| Izod Impact, Notched | 6.73 J/cm | 12.6 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 62.8 °C | 145 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 43.9 °C | 111 °F |
Users viewing this material also viewed the following:
- MV Labs LU400 LuCl3·6H2O Lutetium chloride hydrate
- Pyrotek TS-117 Thermoset Electrical Insulation Product (Nema Grade: GPO-1)
- Victrex® PEEK 90P Polyetheretherketone, Unreinforced
- I. Stern IS-7985 Polyethylene Terephthalate Resin
- Mo-Sci Corporation GAI-40-N Green A Intruder Filter Glass
- Solvay TECHNYLSTARâ„¢ SX 216 V60 PA6, 60% glass filled, DRY
- Teknor Apex Telcar® TL-1336 Thermoplastic Elastomer
- UBE 7034T Nylon 6/12 Monofilament (Drawing Ratio=4.5, Diameter 2 mm)
- Braskem LF320 LLDPE Cast Film Extrusion Polyethylene Copolymer
Copyright © lookpolymers.com All Rights Reserved