- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyester, TP
- Polyethylene Terephthalate (PET)
- Polyethylene Terephthalate (PET), Unreinforced
- Aclo Accucomp PET PET008L
Aclo Accucomp PET PET008L
| Category | Polymer , Thermoplastic , Polyester, TP , Polyethylene Terephthalate (PET) , Polyethylene Terephthalate (PET), Unreinforced |
| Manufacturer | Aclo Compounders |
| Trade Name | Accucomp |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aclo Accucomp PET PET008L.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.34 g/cc | 0.0484 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in | MD; ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 113 | 113 | ASTM D785 |
| Tensile Strength at Break | 23.0 MPa | 3340 psi | ASTM D638 |
| Tensile Strength, Yield | 63.0 MPa | 9140 psi | ASTM D638 |
| Elongation at Break | 15 % | 15 % | ASTM D638 |
| Elongation at Yield | 5.0 % | 5.0 % | ASTM D638 |
| Tensile Modulus | 1.826 GPa | 264.9 ksi | ASTM D638 |
| Flexural Strength | 83.01 MPa | 12040 psi | ASTM D790 |
| Flexural Modulus | 2.768 GPa | 401.4 ksi | ASTM D790 |
| Izod Impact, Notched | 0.139 J/cm | 0.260 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 66.1 °C | 151 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 62.8 °C | 145 °F |
Users viewing this material also viewed the following:
- MV Labs PD465 Na2PdCl4 Sodium tetrachloropalladate(II)
- PolyOne Elastamax™ EG-9077 Thermoplastic Elastomer (TPE)
- Chevron Phillips 6109FK Linear low density polyethylene blown film resin (discontinued **)
- Overview of materials for Polytetrafluoroethylene (PTFE), Mica Filled
- Mitsubishi Xantar® C CF 407 Polycarbonate/ABS Blend
- Samsung Cheil Industries Infino® LS-3104G PC, 10% Glass Filled High Impact
- SABIC Innovative Plastics Noryl 534 PPE+PS
- Total HDPE 46060 UV High Density Polyethylene - Large Part Blow Molding Resin
- Polyram PlusTek PA4802G6BK10 Nylon 66 for Injection Molding, 30% Glass Fiber Reinforced, PTFE Lubricated
- Dow ATTANE™ 4402 Ultra Low Density Polyethylene, Cast Film Grade
Copyright © lookpolymers.com All Rights Reserved