ATI Allegheny Ludlum Stainless Steel Free Machining Grade Type 416, Tempered at 760°C (UNS S41600)

Category	Metal , Ferrous Metal , Stainless Steel , T 400 Series Stainless Steel
Manufacturer	ATI Allegheny Ludlum
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	ATI Allegheny Ludlum Stainless Steel Free Machining Grade Type 416, Tempered at 760°C (UNS S41600).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Allegheny Ludlum's 416 is a free-machining stainless steel specifically designed to exhibit improved machinability. These modifications retain, in so far as possible, the good mechanical properties and corrosion resistance of the basic or patent compositions which they represent. Sulfur is added to produce the free-machine characteristics. Type 416 is a martensitic 12 to 13% Cr free-machining stainless steel which can be hardened by heat treatment to higher strength and hardness levels. It has better machining properties than the austenitic grades, but lower corrosion resistance.Tensile strength and hardness below for samples oil quenched from 1800°F (982°C) then tempered at 760°C.Information provided by Allegheny Ludlum Corporation.

Physical Properties	Metric	English	Comments
Density	7.64 g/cc	0.276 lb/in³

Mechanical Properties	Metric	English	Comments
Hardness, Brinell	180	180
Hardness, Rockwell B	96	96
Tensile Strength, Ultimate	565 MPa @Temperature 23.0 °C	81900 psi @Temperature 73.4 °F
Tensile Strength, Yield	407 MPa @Strain 0.200 %	59000 psi @Strain 0.200 %
Elongation at Break	25 %	25 %	in 2" (50 mm)
Reduction of Area	62 %	62 %
Modulus of Elasticity	200 GPa	29000 ksi	in tension
Fatigue Strength	280 MPa	40600 psi	test conditions not reported

Thermal Properties	Metric	English	Comments
CTE, linear	10.1 µm/m-°C @Temperature 20.0 - 100 °C	5.61 µin/in-°F @Temperature 68.0 - 212 °F
	11.5 µm/m-°C @Temperature 20.0 - 500 °C	6.39 µin/in-°F @Temperature 68.0 - 932 °F
	12.4 µm/m-°C @Temperature 20.0 - 787 °C	6.89 µin/in-°F @Temperature 68.0 - 1450 °F
Thermal Conductivity	24.9 W/m-K	173 BTU-in/hr-ft²-°F
Melting Point	1490 °C	2710 °F
Maximum Service Temperature, Air	677 °C	1250 °F	oxidation resistance is good in continuous service

Component Elements Properties	Metric	English	Comments
Carbon, C	<= 0.15 %	<= 0.15 %
Chromium, Cr	12 - 14 %	12 - 14 %
Iron, Fe	86 %	86 %	as balance
Manganese, Mn	<= 1.25 %	<= 1.25 %
Molybdenum, Mo	<= 0.60 %	<= 0.60 %
Phosphorous, P	<= 0.060 %	<= 0.060 %
Silicon, Si	<= 1.0 %	<= 1.0 %
Sulfur, S	>= 0.15 %	>= 0.15 %

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.0000570 ohm-cm	0.0000570 ohm-cm

Users viewing this material also viewed the following: