ALM PA-840-GSL Filled Nylon 12 Prototyping Polymer

Category	Polymer , Rapid Prototyping Polymer , Thermoplastic , Nylon , Nylon 12
Manufacturer	ALM Advanced Laser Materials
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	ALM PA-840-GSL Filled Nylon 12 Prototyping Polymer.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Engineered for excellent mechanical properties, part definition and surface finish.Stabilized against thermal degradation resulting in little or no scrap material, with typical virgin refresh rates from 15 to 25%.Good temperature control is required to process this material.Information provided by Advanced Laser Materials (ALM).

Physical Properties	Metric	English	Comments
Bulk Density	0.420 g/cc	0.0152 lb/in³	ASTM D1895
Density	0.870 g/cc	0.0314 lb/in³	Sintered; ASTM D792
Particle Size	50 µm	50 µm	D50
	38 - 78 µm	38 - 78 µm	D10-D90
Melt Flow	13 g/10 min @Load 5.00 kg, Temperature 235 °C	13 g/10 min @Load 11.0 lb, Temperature 455 °F	3 min; ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	37.0 MPa	5370 psi	Z; ASTM D638
	48.0 MPa	6960 psi	XY; ASTM D638
Elongation at Break	3.0 %	3.0 %	Z; ASTM D638
	4.0 %	4.0 %	XY; ASTM D638
Tensile Modulus	2.137 GPa	309.9 ksi	Z; ASTM D638
	3.378 GPa	489.9 ksi	XY; ASTM D638

Thermal Properties	Metric	English	Comments
Melting Point	200 °C	392 °F	ASTM D3418

Users viewing this material also viewed the following: