- HOME
- POLYMER SEARCH
- Martensitic
- AK Steel 17-4 PH® Precipitation Hardening Stainless Steel, Condition A
AK Steel 17-4 PH® Precipitation Hardening Stainless Steel, Condition A
| Category | Metal , Ferrous Metal , Martensitic , Stainless Steel , Precipitation Hardening Stainless |
| Manufacturer | AK Steel |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | AK Steel 17-4 PH® Precipitation Hardening Stainless Steel, Condition A.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
AK Steel 17-4 PH® provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), and good toughness in both base metal and welds. Short-time, low-temperature heat treatments minimize distortion and scaling. This alloy is widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries. The material supplied from the mill is in Condition A. After fabrication eight standard heat treatments have been developed to provide a wide range of properties.Information provided by AK Steel
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.78 g/cc | 0.281 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell C | 35 | 35 | |
| Tensile Strength, Ultimate | 1103 MPa | 160000 psi | |
| Tensile Strength, Yield | 1000 MPa @Strain 0.200 % |
145000 psi @Strain 0.200 % |
|
| Elongation at Break | 5.0 % | 5.0 % | in 2 inches |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 10.8 µm/m-°C @Temperature 21.0 - 93.0 °C |
6.00 µin/in-°F @Temperature 69.8 - 199 °F |
|
| 11.3 µm/m-°C @Temperature <=427 °C |
6.28 µin/in-°F @Temperature <=801 °F |
||
| Specific Heat Capacity | 0.460 J/g-°C | 0.110 BTU/lb-°F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Carbon, C | <= 0.070 % | <= 0.070 % | |
| Chromium, Cr | 15 - 17.5 % | 15 - 17.5 % | |
| Copper, Cu | 3.0 - 5.0 % | 3.0 - 5.0 % | |
| Iron, Fe | 69.91 - 78.85 % | 69.91 - 78.85 % | As Remainder |
| Manganese, Mn | <= 1.0 % | <= 1.0 % | |
| Nb + Ta | 0.15 - 0.45 % | 0.15 - 0.45 % | |
| Nickel, Ni | 3.0 - 5.0 % | 3.0 - 5.0 % | |
| Phosphorous, P | <= 0.040 % | <= 0.040 % | |
| Silicon, Si | <= 1.0 % | <= 1.0 % | |
| Sulfur, S | <= 0.030 % | <= 0.030 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000980 ohm-cm | 0.0000980 ohm-cm |
Users viewing this material also viewed the following:
- RheTech Products M25UVP250-01 25% Mica Reinforced Polypropylene Copolymer, UV Stabilized, Black
- Lubrizol Advanced Materials Pearlstick® 45-60/14 Polycaprolactone based TPU
- Haynes 556® alloy, cold rolled, solution annealed sheet, 0.8-2.8 mm thick
- SGL Carbon Group PANOX® FB T320 EEA Oxidized Textile Fiber, Continuous Tow with 320k filaments, For carbon/carbon and spinning
- Cossa Polimeri ESTADIENE 1016 T V0 Flame Retardant ABS
- DSM Akulon® S223-G4U (Dry) 23% Glass Reinforced Nylon 66 (North America)
- EMS-Griltech Griltex® 2A Copolyamide Hotmelt Adhesive (Apparel Interlinings)
- Teknor Apex Monprene® MP-2604B Thermoplastic Elastomer
- BASF Capron® 8333G HI HS BK-102 Impact Modified, 33% Glass-Filled Nylon 6 (Conditioned) (discontinued **)
- ExxonMobil Oppalyte™ 33ICE OPP Film
Copyright © lookpolymers.com All Rights Reserved