- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Impact Modified; Molded/Extruded
- A. Schulman POLYFORT™ PP 2173HU Toyota High Impact Copolymer Polypropylene
A. Schulman POLYFORT™ PP 2173HU Toyota High Impact Copolymer Polypropylene
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Impact Modified; Molded/Extruded |
| Manufacturer | A. Schulman, Inc. |
| Trade Name | POLYFORT™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | A. Schulman POLYFORT™ PP 2173HU Toyota High Impact Copolymer Polypropylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
DescriptionPolyfort® PP 2173HU Toyota is a high flow, UV stabilized, high impact copolymer polypropylene.Information provided by A. Schulman.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.905 g/cc | 0.905 g/cc | ASTM D792 |
| Melt Flow | 20 g/10 min @Temperature 230 °C |
20 g/10 min @Temperature 446 °F |
Condition L; ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 18.0 MPa | 2610 psi | ASTM D638 |
| Elongation at Yield | 37 % | 37 % | |
| Flexural Strength | 18.0 MPa | 2610 psi | |
| Flexural Modulus | 0.760 GPa | 110 ksi | ASTM D790 |
| Izod Impact, Notched | 6.00 J/cm | 11.2 ft-lb/in | ASTM D256 |
| Falling Dart Impact | 5.10 J @Thickness 1.78 mm, Temperature -30.0 °C |
3.76 ft-lb @Thickness 0.0701 in, Temperature -22.0 °F |
Pass |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 100 °C | 212 °F | ASTM D648 |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID® 6 NG1 GF 30 HLS PA6 reinforced with glass fiber, UV stabilized, hydrolysis resistant
- MarkeTech Cu/Mo/Cu 1:4:1 Laminated Sheet
- LTL Color Compounds ColorFast® PCGF120 Polycarbonate, 20% Glass-Filled
- KKPC KOSYN KSL 105 Styrene-Butadiene Latex
- Indium Corp. Fine ITO Indium Tin Oxide
- Teknor Apex MONPRENE® MP 2840E Thermoplastic Elastomer
- Teknor Apex Sinvicomp SFN 8510 Polyvinyl Chloride, Flexible
- Wingate Alloys Winco HCP 60 Induction Hardened Turned, Ground and Polished, Hard Chromium Plated Shafting
- PolyOne Synprene® IT 37-034 Thermoplastic Elastomer - SBC, Mineral Filled (discontinued **)
- Master Bond Supreme 10HTFL One Part Epoxy Cures at 250°F
Copyright © lookpolymers.com All Rights Reserved