- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- Epoxy Adhesive
- 3M Scotch-Weld™ DP-100NS Epoxy Adhesive
3M Scotch-Weld™ DP-100NS Epoxy Adhesive
| Category | Polymer , Thermoset , Epoxy , Epoxy Adhesive |
| Manufacturer | 3M |
| Trade Name | Scotch-Weld™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | 3M Scotch-Weld™ DP-100NS Epoxy Adhesive.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
3M™ Scotch-Weld™ Epoxy Adhesive DP-100NS is a two-part adhesives offering fast cure and machinability.Information provided by 3M
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Brookfield Viscosity | 50000 - 85000 cP | 50000 - 85000 cP | Accelerator, RVF #6 spindle, 20 rpm @ 27°C |
| 90000 - 150000 cP | 90000 - 150000 cP | Base, RVF #6 spindle, 20 rpm @ 27°C |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 80 - 85 | 80 - 85 | ASTM D2240 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 29.0 µm/m-°C @Temperature -50.0 - 30.0 °C |
16.1 µin/in-°F @Temperature -58.0 - 86.0 °F |
|
| 149 µm/m-°C @Temperature 50.0 - 110 °C |
82.8 µin/in-°F @Temperature 122 - 230 °F |
||
| Thermal Conductivity | 0.183 W/m-K @Temperature 45.0 °C |
1.27 BTU-in/hr-ft²-°F @Temperature 113 °F |
|
| Glass Transition Temp, Tg | 34.0 °C | 93.2 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 2.20e+14 ohm-cm | 2.20e+14 ohm-cm | ASTM D257 |
| Dielectric Strength | 43.3 kV/mm | 1100 kV/in | ASTM D257 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 1440 - 2880 min | 24.0 - 48.0 hour |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | Translucent |
Users viewing this material also viewed the following:
- MV Labs CO700 Co(NO3)2·6H2O Cobalt(II) nitrate hexahydrate
- PolyOne Geon™ Vinyl Flexible R1480E Polyvinyl Chloride, Flexible (PVC, Flexible)
- Materion Beryllium Copper Alloy 25 Rod and Bar; HT (TH04) Temper; over 9.5 to 25.4 mm (UNS C17200)
- TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with 20 PHR Hi-Sil 233 Filler
- A. Schulman SCHULAMID® 66 MK4015H 40% Glass Fiber/Mineral Reinforced, Heat Stabilized Nylon 66
- The Chemical Company VESTINOL® INB Benzoic Acid Isononyl Ester
- Unitika RUN35-TA Light resistant PA6, Conditioned
- 3M Scotchcal™ 5000 Reflective Graphic Film'
- Dow PAPI™ 27 Polymeric MDI
- PolyOne Nymax™ GF 1800 43 Natural Nylon 612 with 43% Glass Fiber (discontinued **)
Copyright © lookpolymers.com All Rights Reserved