3M Dyneon™ FC 2173 Fluoroelastomer (discontinued **)

Category	Polymer , Thermoset , Fluoropolymer, TS , Rubber or Thermoset Elastomer (TSE)
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	3M Dyneon™ FC 2173 Fluoroelastomer (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Composition: di-polymer of vinylidene fluoride and hexafluoropropyleneLow viscosityProcess targets: compression moldingProprietary incorporated cure technologyExcellent mold flow and mold release characteristicsImproved processing version of FC 2170High shrinkage version of FC 2170Excellent heat and chemical resistanceInformation provided by Dyneon, A 3M Company

Physical Properties	Metric	English	Comments
Specific Gravity	1.80 g/cc	1.80 g/cc
Mooney Viscosity	28 @Temperature 121 °C	28 @Temperature 250 °F	ML1+10

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	74	74	Press Cure 7 minutes @ 177°C, Post Cure 24 hours @ 260°C; ASTM D2240
Tensile Strength at Break	14.8 MPa	2150 psi	Press Cure 7 minutes @ 177°C, Post Cure 24 hours @ 260°C
Elongation at Break	890 %	890 %	Press Cure 7 minutes @ 177°C, Post Cure 24 hours @ 260°C; ASTM D4645
100% Modulus	0.0148 GPa	2.15 ksi	Press Cure 7 minutes @ 177°C, Post Cure 24 hours @ 260°C
Compression Set	18 %	18 %	Aged 70 hours @ 200°C

Thermal Properties	Metric	English	Comments
Transformation Temperature	-18.0 °C	-0.400 °F	TR10; ASTM D1329

Component Elements Properties	Metric	English	Comments
Fluorine, F	65.9 %	65.9 %

Descriptive Properties	Value	Comments
5`50, Time to 50% cure, minutes	1.7	177°C
Color	Opaque Off-White
MH, Maximum Torque, inch-lb @ 177°C	23.8
ML, Minimum Torque inch-lb @ 177°C	1.1
Solubility	Ketones and Esters
t`90 - Time to 90% cure @ 177°C - minutes	2.6
ts2 - Time to 2 in-lb rise from min @ 177°C - min	1.4

Users viewing this material also viewed the following: