3D Systems DuraForm® EX Impact-Resistant Plastic for SLS® Systems

Category	Polymer , Rapid Prototyping Polymer
Manufacturer	3D Systems Corporation
Trade Name	Duraform®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	3D Systems DuraForm® EX Impact-Resistant Plastic for SLS® Systems.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

This impact-resistant plastic offers the toughness of injection-molded polypropylene and ABS and is suitable for Rapid Manufacturing. For use with all Sinterstation® Pro and Sinterstation HiQ™ series SLS® systems.ApplicationsComplex, thin-wall ductworkMotorsportsAerospaceUnmanned air vehicles (UAV’s)Housings and enclosuresImpellersConnectorsConsumer sporting goodsVehicle dashboards and grillesBumpersSnap-fit designsLiving hingesFunctional prototypes that require end-use performance propertiesAppropriate for low- to mid-volume rapid manufacturingAll information provided by 3D Systems.

Physical Properties	Metric	English	Comments
Specific Gravity	1.01 g/cc	1.01 g/cc	ASTM D792
Water Absorption	0.48 % @Time 86400 sec	0.48 % @Time 24.0 hour	ASTM D570
Water Absorption at Saturation	1.15 %	1.15 %	ASTM D570

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell L	69	69	ASTM D785
Hardness, Rockwell M	34	34	ASTM D785
Hardness, Shore D	74	74	ASTM D2240
Tensile Strength, Ultimate	48.0 MPa	6960 psi	ASTM D638
Tensile Strength, Yield	37.0 MPa	5370 psi	ASTM D638
Elongation at Break	47 %	47 %	ASTM D638
Elongation at Yield	5.0 %	5.0 %	ASTM D638
Tensile Modulus	1.517 GPa	220.0 ksi	ASTM D638
Flexural Strength	46.0 MPa	6670 psi	ASTM D790
Flexural Yield Strength	42.0 MPa	6090 psi	ASTM D790
Flexural Modulus	1.31 GPa	190 ksi	ASTM D790
Izod Impact, Notched	0.740 J/cm @Temperature 23.0 °C	1.39 ft-lb/in @Temperature 73.4 °F	ASTM D256
Izod Impact, Unnotched	14.86 J/cm @Temperature 23.0 °C	27.84 ft-lb/in @Temperature 73.4 °F	ASTM D256
Gardner Impact	11.8 J	8.70 ft-lb	ASTM D5420

Thermal Properties	Metric	English	Comments
CTE, linear	120 µm/m-°C @Temperature 0.000 - 50.0 °C	66.7 µin/in-°F @Temperature 32.0 - 122 °F	ASTM E831
	342 µm/m-°C @Temperature 85.0 - 145 °C	190 µin/in-°F @Temperature 185 - 293 °F	ASTM E831
Specific Heat Capacity	1.75 J/g-°C	0.418 BTU/lb-°F	ASTM E1269
Thermal Conductivity	0.510 W/m-K	3.54 BTU-in/hr-ft²-°F	ASTM E1225
Deflection Temperature at 0.46 MPa (66 psi)	188 °C	370 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	48.0 °C	118 °F	ASTM D648
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.30e+13 ohm-cm	1.30e+13 ohm-cm	ASTM D257
Surface Resistance	4.90e+12 ohm	4.90e+12 ohm	ASTM D257
Dielectric Constant	4.5 @Frequency 1000 Hz	4.5 @Frequency 1000 Hz	ASTM D150
Dielectric Strength	18.5 kV/mm	470 kV/in	ASTM D149
Dissipation Factor	0.050 @Frequency 1000 Hz	0.050 @Frequency 1000 Hz	ASTM D150

Users viewing this material also viewed the following: