Polymer Property : Cure Time = 0.500 hour Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Processing Properties	Metric	English	Comments
Cure Time	30.0 min	0.500 hour	With Primer (Fixture)
ND Industries 440 High pressure Sealant Pneumatic and hydraulic sealant fluid, for power and gas system connections
Cure Time	30.0 min @Temperature 150 °C	0.500 hour @Temperature 302 °F	Oven
Permabond ES550 Epoxy Resin PERMABOND ES550 is a single-part epoxy paste which is slump-resistant (does not flow) during cure. The adhesive is toughened for maximum impact resistance, along with excellent peel and shear streng..
Cure Time	30.0 min @Temperature 150 °C	0.500 hour @Temperature 302 °F	Oven
Permabond ES578 Epoxy Resin PERMABOND® ES578 is a single-part heat cured epoxy adhesive with excellent adhesion to metal surfaces, ceramics as well as composite materials. ES578 provides excellent thermal conductivity and bon..
Cure Time	30.0 min @Temperature -55.0 - 150 °C	0.500 hour @Temperature -67.0 - 302 °F	Handling
Palm Labs Adhesives TURBO-LOCK SERIES 15 Anaerobic Thread Locking Compound TURBO-LOCK 15 SERIES is a fast curing, large bolt, RED, high strength, anaerobic thread-locking compound for bonding and sealing threads. Prevents rusting of threads. It is highly resistance to heat..
Cure Time	30.0 min @Temperature 152 °C	0.500 hour @Temperature 305 °F
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer with 20 PHR N330 (HAF) Black MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c..
Cure Time	30.0 min @Temperature 142 °C	0.500 hour @Temperature 287 °F
TSE Industries Millathane® CM Millable Polyether Urethane Rubber, Hardness 66A MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje..
Cure Time	30.0 min @Temperature 210 Â°C	0.500 hour @Temperature 410 Â°F
Lord Adhesives 8621 Polymer Resistor Composition LORD 8600 series polymer resistor compositions are designed for screen print application onto a wide range of substrates.All information provided by Lord.
Cure Time	30.0 min @Temperature 150 Â°C	0.500 hour @Temperature 302 Â°F
Lord Adhesives Thermosetâ„¢ ME-455 Epoxy Board Level Encapsulant LORD Thermosetâ„¢ ME-455 encapsulant is a onecomponent, semiconductor grade epoxy designed for the encapsulation of wire-bonded or flip chip die in PPGA, BGA, MCM and other cavity packages. It is..
Cure Time	30.0 - 35.0 min	0.500 - 0.583 hour	Fixture time
ITW Devcon 2 TonÂ® Epoxy Clear Epoxy, Clear, White Information provided by ITW Devcon
Cure Time	30.0 min @Temperature 120 °C	0.500 hour @Temperature 248 °F
Tra-Con Tra-Duct 921H01 Information provided by Tra-Con Inc.
Cure Time	>= 30.0 min	>= 0.500 hour
Trelleborg Emerson & Cuming Stycast® XT-5038-9 Two-Component Epoxy Flame Retardant Encapsulant Features and Typical ApplicationsProvide flame resistance down to 1/8 of an inch. These products also offer various other features such as thermal shock protection, low viscosity, and thermal conduc..
Cure Time	30.0 min	0.500 hour
Loctite® 272 High Temperature/High Strength Threadlocker ThreadlockersInvented by Loctite Corporation as a revolutionary method to lock and seal threaded fasteners, Loctite® Liquid Threadlockers have found wide acceptance in a range of applications--from..
Cure Time	30.0 min @Temperature 152 °C	0.500 hour @Temperature 305 °F
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer with 60 PHR N330 (HAF) Black MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c..
Cure Time	30.0 - 60.0 min	0.500 - 1.00 hour
Trelleborg Emerson & Cuming Stycast® 2850FT-FR/11 Two-Component Epoxy Flame Retardant Encapsulant Features and Typical ApplicationsProvide flame resistance down to 1/8 of an inch. These products also offer various other features such as thermal shock protection, low viscosity, and thermal conduc..
Cure Time	30.0 - 240 min	0.500 - 4.00 hour	Full Cure; Primed
Loctite® Gasket Eliminator® 518 Flange Sealant Anaerobic GasketingLoctite® 518 Flexible Cure Gasket Eliminator® Flange SealantForms a flexible, solvent-resistance seal that will not tear or decay. Seals to 300ºF and fills gaps to 0.050". Can..
Cure Time	30.0 min @Temperature 180 °C	0.500 hour @Temperature 356 °F
Dow BETAMATE™ 1045 Epoxy BETAMATE™ 1045 is a one component, epoxy based adhesive especially developed for the body shop. The product has the following properties: Good rheology performance (Wash-out resistant, excellent..
Cure Time	>= 30.0 min @Temperature 75.0 °C	>= 0.500 hour @Temperature 167 °F	tack free
ACC EP RAP-1567 HX EPI Engineered Polymers Aliphatic Polyurea RAP-1567 is a two component 100% solids, no VOC’s, aliphatic polyureas “Powered by ReactAmine® Technology” that was developed for UV stable (colorfast) polyurea applications. This new generation..
Cure Time	>= 30.0 min @Temperature 75.0 °C	>= 0.500 hour @Temperature 167 °F	tack free
ACC EP RAP-1567 SP-HX EPI Engineered Polymers Silicone Aliphatic Polyurea RAP-1567 SP is a two component 100% solids, no VOC’s, silicone aliphatic polyureas “Powered by ReactAmine® Technology” that was developed for UV stable (colorfast) polyurea applications. This ne..
Cure Time	30.0 min @Temperature 25.0 °C	0.500 hour @Temperature 77.0 °F	Cooling time
Aquabond Technologies Aquabond™ ABS-55 Water Soluble Adhesive and Bonding Thermoplastic Description: Aquabond's water soluble thermoplastic is designed for temporary mounting of hard materials for slicing, dicing, grinding, lapping and polishing and comes in 3 different bonding tem..
Cure Time	30.0 - 60.0 min	0.500 - 1.00 hour	Air Set prior to curing
Aremco Aremco-Seal™ 529 High Temperature Specialty Coatings Silicone Transparent silicone sealer with exceptional electrical and moisture resistance to 600°F (316°C). Ideal for use in cartridge heaters.
Cure Time	30.0 min	0.500 hour	Pressing Time
3M 5010 Polyurethane Multi-Purpose Adhesive 3M™ Polyurethane Multi-Purpose Adhesive 5010 is a one component, fast curing adhesive which forms a rigid permanent bond. 3M 5010 bonds to a wide variety of materials including wood, foam panels, f..
Cure Time	>= 30.0 min @Temperature 75.0 °C	>= 0.500 hour @Temperature 167 °F	tack free
ACC EP RAP 45 14 EPI Engineered Polymers Aliphatic Polyurea EP RAP 45 14 Aliphatic Polyurea, “Powered by Reactamine® Technology”, is a two component 100% solids, no VOC’s, aliphatic polyurea coating that was developed for UV stable (colorfast) polyurea f..
Cure Time	30.0 - 240 min	0.500 - 4.00 hour	Full Cure; Primed
Loctite® Gasket Eliminator® 510 Flange Sealant Anaerobic GasketingLoctite® 510 High Temperature Rigid Cure Gasket Eliminator® Flange SealantProduct has a temperature range to 400ºF with excellent solvent and chemical resistance. Makes or dre..