Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 360 - 1440 min @Temperature 23.0 °C |
6.00 - 24.0 hour @Temperature 73.4 °F |
Zinc, working strength |
Permabond F202 Anaerobic Retainer The unique 'toughening' process incorporated into Permabond® F202 gives this anaerobic adhesive excellent resistance to peel and impact forces. Primarily designed for use on metal surfaces, it is a.. |
|||
Cure Time | 360 min @Temperature 23.0 °C |
6.00 hour @Temperature 73.4 °F |
Zinc, working strength |
Permabond HH167 Anaerobic Retainer Permabond® HH167 is a high viscosity gap filling silver paste, which can be used for repairing metal machinery parts. It is ideal for repairing worn shafts, broken threads, damaged keyways and spli.. |
|||
Cure Time | 360 min @Temperature 23.0 °C |
6.00 hour @Temperature 73.4 °F |
Stainless steel, handling strength |
Permabond HM128 Anaerobic Threadlocker Permabond® HM128 Threadlocker is a high strength adhesive for permanent assembly. It is typically used for preventing vibration loosening of bolts, studs and cap screws. Full cure to a cross-linked.. |
|||
Cure Time | 360 min @Temperature 23.0 °C |
6.00 hour @Temperature 73.4 °F |
M10 steel, working strength |
Permabond LH050P Pure Anaerobic Threadsealant PERMABOND® LH050 PURE anaerobic pipe sealant is single component paste that cures only when in contact with metal parts and oxygen is excluded. The sealant fills up the entire space between male an.. |
|||
Cure Time | 360 min @Temperature 23.0 °C |
6.00 hour @Temperature 73.4 °F |
Stainless steel, handling strength |
Permabond F201 Anaerobic Retainer Permabond® F201 is an anaerobic adhesive which has been developed to give excellent resistance to peel and impact forces. This toughening, combined with good adhesion to aluminum and copper alloys,.. |
|||
Cure Time | 360 - 1440 min @Temperature 23.0 °C |
6.00 - 24.0 hour @Temperature 73.4 °F |
Zinc, working strength |
Permabond HH040 Pure NSF 61 Approved Anaerobic Retainer Permabond® HH040 PURE is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space” between parts and upon cure u.. |
|||
Cure Time | 360 min @Temperature 23.0 °C |
6.00 hour @Temperature 73.4 °F |
Zinc, full strength |
Permabond MM115 Anaerobic Threadlocker Permabond® MM115 Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking metal bolts, nuts and screws that may require disassembly for service and maintenance... |
|||
Cure Time | 360 min @Temperature 23.0 °C |
6.00 hour @Temperature 73.4 °F |
M10 steel, full strength |
Permabond MM115 Anaerobic Threadlocker Permabond® MM115 Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking metal bolts, nuts and screws that may require disassembly for service and maintenance... |
|||
Cure Time | 360 min @Temperature 23.0 °C |
6.00 hour @Temperature 73.4 °F |
M10 steel, full strength |
Permabond MM115P Pure Anaerobic Threadlocker Permabond® MM115 PURE Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking metal bolts, nuts and screws that may require disassembly for service and mainten.. |
|||
Cure Time | 360 min @Temperature 120 °C |
6.00 hour @Temperature 248 °F |
|
Trelleborg Emerson & Cuming Eccobond® 104 Two-Component High Temperature Performance Epoxy Adhesive Emerson & Cuming 104 Eccobond® Two-Component High Temperature Performance Epoxy AdhesiveFilled, heat curing, high temperature resistant, epoxy adhesive. Excellent chemical resistance. Maintains hig.. |
|||
Cure Time | 360 min @Temperature 32.0 °C |
6.00 hour @Temperature 89.6 °F |
Light Load |
Chesterton ARC BX2 Contractor Grade Fine Sliding Wear Compound Description: ARC BX2 is an advanced contractor grade ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It .. |
|||
Cure Time | 360 min @Temperature 32.0 °C |
6.00 hour @Temperature 89.6 °F |
Foot Traffic |
Chesterton ARC CS4 low-viscosity, 100% solids, barrier coating Description: An advanced composite formulated to protect concrete surfaces from harsh chemical attack. It is normally applied at a thickness of 250-375 microns (10-15 mils) per coat in a 2 coat syst.. |
|||
Cure Time | 360 min @Temperature 32.0 °C |
6.00 hour @Temperature 89.6 °F |
Light Load |
Chesterton ARC I BX1 Impact & Wear Resistant Epoxy Composite Description: An advanced grade epoxy and urethane composite for the repair and protection of all metal surfaces subjected to severe abrasion and impact. It is normally applied at a thickness of 6 mm.. |
|||
Cure Time | 360 min @Temperature 10.0 °C |
6.00 hour @Temperature 50.0 °F |
Light Load |
Chesterton ARC NVE SYSTEM Vinyl Ester Lining Description: ARC NVE is a high performance, quartz reinforced, three-component, modified novolac vinyl ester lining capable of being applied to horizontal and vertical surfaces. The NVE system kit i.. |
|||
Cure Time | 360 min @Temperature 10.0 °C |
6.00 hour @Temperature 50.0 °F |
Tack Free |
Chesterton ARC SD4i High temperature ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10-15 mils) per coat.. |
|||
Cure Time | 360 min @Temperature 60.0 °C |
6.00 hour @Temperature 140 °F |
|
Cytec EN-2521 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s.. |
|||
Cure Time | 360 min @Temperature 60.0 °C |
6.00 hour @Temperature 140 °F |
|
Cytec EN-2523 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s.. |
|||
Cure Time | 360 min @Temperature 60.0 °C |
6.00 hour @Temperature 140 °F |
|
Cytec EN-2527 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s.. |
|||
Cure Time | 360 min @Temperature 60.0 °C |
6.00 hour @Temperature 140 °F |
|
Cytec EN-2543 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s.. |
|||
Cure Time | 360 - 480 min @Temperature 24.0 °C |
6.00 - 8.00 hour @Temperature 75.2 °F |
demold time |
BCC Products BC 8160 Urethane Casting BC8160 is a low viscosity two-component urethane casting compound that is specifically formulated for its flexural and impact strength. It is recommended for use for the production casting of highly.. |
|||
Cure Time | 360 min @Temperature 25.0 °C |
6.00 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond 224-8 Room Temperature Cure Epoxy Adhesive TRA-BOND 224-8 room temperature cure epoxy adhesive is a thermally conductive version of 224-1. This adhesive develops structural strength rapidly. When cured at room temperature, this adhesive prov.. |
|||
Cure Time | 360 min @Temperature 23.0 °C |
6.00 hour @Temperature 73.4 °F |
Stainless steel, handling strength |
Permabond A011 Anaerobic Threadlocker Permabond® A011 is an anaerobic adhesive designed for locking and sealing threaded or coaxially fitting metal parts where subsequent dismantling is required. Its controlled strength ensures fatigue.. |
|||
Cure Time | 360 - 1440 min @Temperature 23.0 °C |
6.00 - 24.0 hour @Temperature 73.4 °F |
Zinc, working strength |
Permabond A011 Anaerobic Threadlocker Permabond® A011 is an anaerobic adhesive designed for locking and sealing threaded or coaxially fitting metal parts where subsequent dismantling is required. Its controlled strength ensures fatigue.. |
|||
Cure Time | 360 min @Temperature 10.0 °C |
6.00 hour @Temperature 50.0 °F |
Light Load |
Chesterton ARC NVE VC Vinyl Ester Sealer Description: ARC NVE VC (Veil Coat) is a two-component, modified epoxy novolac vinyl ester sealer coat formulated for application by brush, roller or spray at 0.15-0.25 mm (0.07-0.010”) wet film th.. |
|||
Cure Time | 360 min @Temperature 23.0 °C |
6.00 hour @Temperature 73.4 °F |
Zinc, working strength |
Permabond A131 Anaerobic Threadsealant Permabond® A131 is an anaerobic adhesive designed to seal threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water. Suitable for use on both parallel an.. |
|||
Cure Time | 360 min @Temperature 23.0 °C |
6.00 hour @Temperature 73.4 °F |
Stainless steel, handling strength |
Permabond A131 Anaerobic Threadsealant Permabond® A131 is an anaerobic adhesive designed to seal threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water. Suitable for use on both parallel an.. |
|||
Cure Time | 360 min @Temperature 32.0 °C |
6.00 hour @Temperature 89.6 °F |
Tack Free |
Chesterton ARC S1HB Sprayable high-viscosity, 100% solids, advanced coating An advanced composite formulated to protect concrete and metal surfaces from corrosion and chemical attack. It is normally applied at a thickness of 1-2 mm (40-80 mils) per coat. However, greater si.. |